| Author |
 Replies: 19 / Views: 2,964 |
Page 2 of 2
|
|
|
|
Pillar of the Community
United States
2543 Posts |
Bullion basically means bars, ingots or rounds. Provident sells silver shot for industrial uses. If by no numismatic value you mean no mark up above spot, then you will not find that. Bullion and shot both are sold at spot plus a minor mark up for profit, however if you look hard enough on craigslist and such, there are always people desperate for cash, especially during the holidays , that will sell for below spot.
|
|
Pillar of the Community
 United Kingdom
4208 Posts |
Im looking for metal silver to use as a chemical. Purity isn't massively important as long as its about 90% or up. Thats why I dont want any numismatic value - its going to be used.
Some will be used for silver nitrate, so I need small pieces, but I also need enough to use either as the metal or enough to hammer into a electrode. Perhaps.
|
|
Pillar of the Community
Canada
1177 Posts |
okay! I did this for chemistry once, honestly, if you go to your nearest college/university, try to talk to the dean of science, if you need a small amount (1-3 ounces) you might be able to purchase it from the school at cost (my university buys about 100 ounces for around 27$ an ounce) it is only 99% refined but we do carry .999
if its for chemistry this might be a good idea because it comes in little 1x1 inch strips you can cut
|
|
Pillar of the Community
United Kingdom
4208 Posts |
Jake - Good idea - I didnt think about buying it as a chemistry supply - but it makes sense - I wouldve expected a premium! Ill talk to the nearest chemistry department I can find.
|
|
Pillar of the Community
United States
2543 Posts |
You can also buy a small ceramic crucible and a cheap oxy/Mapp torch from Home Depot. Silver isn't hard to melt.
|
|
Pillar of the Community
1283 Posts |
Trust me smelting silver is a huge pain in the ole butt. Even if you don't value your time the cost of the gas, crucible, molds, borax, then the refining equip ie a dremmel, stamp and sand paper in my opinion it isn't worth the time. Silver Shot is still a little over priced from the online dealers. You want the cheap silver you got to do the leg work and work the auctions, yard sales, ebay side deals all of these are known for cheap sterling but do take some effort. Good luck I hope your results turn out better then mine. I have personally came to the conclusion that I am going to send my bag of sterling scrap to a refiner and be done with it. |
|
Valued Member
United States
117 Posts |
I've seen some silver wire and other junk silver products on CL every so often, usually for spot.
If all you need is 90%, just find some U.S. junk silver change and if it's to big, smashing it with a hammer should do the trick. I'm sure people would be happier if you used a really ugly scratched up, cleaned, casino'd coin or something that has no numismatic value. (And I bet all the coin collectors out there are crying inside with my horrible tip)
|
|
Pillar of the Community
United States
1424 Posts |
how about holed or other damaged coins?
|
|
Pillar of the Community
Canada
1177 Posts |
if its for chemical process you'll want to use .99 or .999
|
|
Pillar of the Community
United Kingdom
4208 Posts |
Id rather not use anything of *any* numismatic value - and those 90% silver american junk coins tend not to show up all that much in UK change.
Thanks for the tip jake - I wasnt sure how the purity would affect it.
|
|
Pillar of the Community
United States
4008 Posts |
Quote:
I also need enough to use either as the metal or enough to hammer into a electrode. Perhaps. Ben, if you will be using this to make colloidal silver, please do not use any coins that are 90% silver for this. They also contain copper that you would not want in a medicinal liquid. Either use the .999 coins or the silver sheet material that is used in chem labs. |
|
Pillar of the Community
United States
1119 Posts |
if you look hard enough you should be able to find a coin that is damaged beyond recognition if you only need 90% or better. In the UK some old sterling coins exists right? I really dont know. so maybe this isn't an option either. If you search even harder you might be able to find a damaged .999 coin somewhere. If you just want to be done with it google search silver shot and buy the cheapest one you see that fits your needs. Or search you tube for video on how to precipitate silver out of solution on copper. This you can use to refine less fine silver to .999 and it will be a fine powder.
|
|
Rest in Peace
United States
1501 Posts |
Non-Numismatic Bullion Stack!  |
|
Bedrock of the Community
United States
10982 Posts |
Quote:
Non-Numismatic Bullion Stack! Let's make that a "Non-Numismatic Bouillon Stack!" Mmm-Mmm Good!  |
|
Pillar of the Community
United States
808 Posts |
"Non-Numismatic Bouillon Snack!"
|
|
Page 2 of 2
|
Replies: 19 / Views: 2,964 |
Page 2 of 2
|
First Page
Posted 11/26/2012 6:19 pm
