I'm a chicken. I carefully use a saw and cut the four edges then lift the top from the bottom. Power band saws can produce enough heat that they remelt the plastic simply making a smaller sealed holder. A coarse tooth jeweler's saw seems to work as well as a carpenter's coping saw. Coping saws are readily available at your local hardware store, ebay and even cheaper at local garage sales.
Be carefull. Many simply repeat what they've read in the past. In most instances, simply using a vice, hammer, etc. creates flying pieces of plastic. Remember that having a piece of that in your eyes could possibly make you blind. The simplist and safest method is to simple use a saw and cut off all 4 sides. Then simply lift one half off. You could place them in a vice if possible to hold while you cut. Using a Dremel type device is faster than a saw but sometimes the heat melts the plastic back together. Any smashing type method could create marks, scratches, dents, etc. on the coins. Cutting with any kind of sheers too may cause flying plastic. Regardless of how you do it, use safety glasses. And remember that the coin inside is yours so open that slab as carefull as possible.
Wow, I have never tried this, and would not buy a slabbed coin if I were going to break it open. But, if you change your mind later and want to put it back in I recommend using duct tape to reseal it.
I would buy a slabbed coin even if I were to break it open. A couple of reasons would be to increase that chance that it is not fake and to get a more accurate grading than I might be able to give as a novice. I don't want to be paying $300 for a coin marked AU by some random seller if it turns out to be EF and only worth $175.
Quote: I use a hammer, a hand towel to wrap the slab in, and a hard surface, usually the side-walk (concrete).
AND when the coin is all messed up, you can say "OOOOPPPS, that was dumb" Sure wonder who does all your laundry. Must be fun picking up pieces of plastic in the washing machines. One person I know that REALLY did that still says just not to smart.
Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited. Contact Us | Advertise Here | Privacy Policy / Terms of Use
First Page
Posted 05/01/2014 02:49 am
