| Author |
 Replies: 18 / Views: 6,986 |
Page 2 of 2
|
|
|
|
Pillar of the Community
United States
3330 Posts |
  to CCF! I cannot tell if it is some kind of mark made on the coin or not. One thing that comes to mind is the possibility of an "Intrinsic Metallic Inclusion" You can read about them here: http://www.error-ref.com/?s=intrins...43;inclusionBut we do need closer photos - of both Obverse and Reverse. Thanks for posting! |
|
Bedrock of the Community
United States
62064 Posts |
Pete2226: This could be possibly true for a solid planchet like the pre 1982 cents, nickels, silver coinage. But the coin posted was a clad. So I feel it would be a partial cladding issue: http://www.error-ref.com/?s=partial+claddingBut better images would be a GREAT help. Edited by coop
08/13/2015 3:05 pm
|
|
Valued Member
United States
226 Posts |
I think I remember seeing a similar type copper color pattern on some State Quarters that was due to wire being rolled into the planchet during production. The rim looks interesting too suggesting that this is an error and not coloring on the coin, a close up of that area would help as well. |
|
Pillar of the Community
United States
3330 Posts |
Quote:
Pete2226: This could be possibly true for a solid planchet like the pre 1982 cents, nickels, silver coinage. But the coin posted was a clad. So I feel it would be a partial cladding issue Thanks coop - I see and understand. Why didn't I think about that?  |
|
New Member
 United States
2 Posts |
Thanks for all the information so far! I have posted a much better quality photo of the coin!
|
|
Moderator
 United States
56855 Posts |
to CCF. Mike where are you? To me it looks like some kind of an error. Where did you get it? John1  Edited by John1
08/13/2015 3:37 pm
|
|
Pillar of the Community
United States
3463 Posts |
Is the Copper looking area raised or incuse?
|
|
Bedrock of the Community
United States
12437 Posts |
The new image is much better  The presence of deep gouges leads me to believe that it is some sort of pre-strike damage to the reverse clad layer. The transition between the copper core and cupronickel cladding appears as expected for a missing clad error, see the quarter pictured below. An accurate weight should determine how much cladding was lost. Nice error, value can be difficult to determine with oddballs like that one but I would guess that it would be worth at least $25.  Edited by biokemist6
08/13/2015 4:08 pm
|
|
Pillar of the Community
United States
2737 Posts |
This is a rolled-in carbon steel bristle from a rotating descaling brush that's used to clean the clad and core strip. As is often the case, the bristle was trapped between the core strip and clad strip. The clad strip split as it was pressed down on the bristle by the rollers. Part of this bristle fell out before rolling was completed while some has been retained. You'll find it's attracted to a magnet.
Error coin writer and researcher.
|
|
Pillar of the Community
United States
7390 Posts |
Now who the heck would have thought about that except you mike. Do you come across them often? |
|
Pillar of the Community
United States
4409 Posts |
Cool error coin. I learned some new information from your post and the knowledgeable collectors here. -MV |
|
Pillar of the Community
United States
2737 Posts |
I come across these every once in awhile. They go back to at least the early 1970s and continue up to the present. They appear in clad denominations from dimes to half dollars. I suspect they can be found in all denominations.
Error coin writer and researcher.
|
|
Pillar of the Community
United States
5964 Posts |
Nice find, peter777. That's pretty sweet. Just a guess, but I bet you could get $150.00 for it. It isn't like you see them everyday- nice swirl.
|
|
Rest in Peace
United States
4078 Posts |
With the bigger image, "I can see clearly now...". Nice.
|
|
Valued Member
136 Posts |
|
|
Page 2 of 2
|
Replies: 18 / Views: 6,986 |
Page 2 of 2
|
First Page
Posted 08/13/2015 3:04 pm
