| Author |
 Replies: 19 / Views: 10,981 |
Page 2 of 2
|
|
|
|
Pillar of the Community
Australia
853 Posts |
I do not know about the rest of the world but in Australia most british pennies in low grades trade for copper value. Even higher grade later date pieces trade for copper price.
I have seen nice british penny sets displayed in blank Dansco supreme albums to great affect. I am a big fan of Aussie copper. If I was not concentrating on my Aussie predecimals I would consider a britsh copper set. I just love KGV and earlier copper in decent grades.
|
|
Pillar of the Community
Australia
1529 Posts |
I am not a big collector of UK coinage, only the odd one here and there. Thanks to the assistance of RG, I was able to acquire a full obverse Penny Brockage circa 1860 and she is a real beauty. Fueled then by the need to know what the reverse side looked like, this was purchased to complete the pairing of a normal coin and an error coin. I am led to believe that this reverse is only used for the 1860 and the 1861 pennies, can a UK member confirm this assumption   Thanks....Lim |
|
Pillar Of The Community
3147 Posts |
I too like the old coppers but have a tremendous time keeping focused on them due to my love of silver. If I knew I could get my paws on a 1925 Australian large cent I would probably focus on them. I do have a complete set of British "cartwheel" cents as they only made them one year!!!
|
|
Pillar of the Community
Australia
1529 Posts |
Get the 1925 Aussie Penny while you still can, this one is real hot and is spiralling upwards all the time. It won't be too long before the 1925 moves out of the reach of the average collector.
|
|
Pillar of the Community
Australia
853 Posts |
I can verify what Lim is saying. I could sell more than I get. Prices have generally increased by about 80% in the last 2 years on these.
|
|
Valued Member
United States
230 Posts |
quote:
Originally posted by lim118
Fueled then by the need to know what the reverse side looked like, this was purchased to complete the pairing of a normal coin and an error coin. I am led to believe that this reverse is only used for the 1860 and the 1861 pennies, can a UK member confirm this assumption
[img ]removed[/img ]
Thanks....Lim
The image you provide is a "toothed border" which is the standard design, started in 1860, and used throughout the Victorian coinage, as well as through all the Kings' and into the Elizabeth coinage. The less common variety only used in 1860 & 1861 is a "beaded border." Edited by kuhli
12/20/2005 10:51 pm
|
|
Pillar of the Community
Australia
1529 Posts |
|
|
Valued Member
United States
230 Posts |
quote:
Originally posted by lim118
Many Thanks kuhli....I take it then this pictured penny is the correct pairring of a normal penny to this brockage penny
Grateful if you will check it out
Beautiful brockage!! Last year I sold off the brockage I had, which was a King George V British India silver 1 rupee piece. There were 3 distinct obverses of the "Young head" Victorian bronze pennies. From your pictures (or my poor vision) I cannot tell which type it is. The designer of the coin was L C Wyon. In 1860-1861, they used dies that has his name engraved into the edge of the bust, near the rim. During the same period (1860-1861) there were also dies in use that had his name engraved in the space between the bust and rim. Throughout the entire mintage of this obverse (1860-1874), and most common is the type that does not have his name at all. After a little more careful examination, I see that the reverse design you show has the LCW initials under the shield, which was only used in 1860-1861. Without his initials was used throughout the entire mintage (1860-1874). There are complete books about all the variations of pennies issued in 1860-1861, and collectors who specialize in just those 2 years, spending their entire lives looking for the few elusive varieties they need. Edited by kuhli
12/21/2005 10:13 am
|
|
Pillar of the Community
Australia
1529 Posts |
Much appreciated kuhli, for the information supplied. Since infected with the "errors" virus, I have a leaning towards brockages and mules and am looking at expanding my collection of them if they are within my "budget"....  |
|
Rest in Peace
 United States
3730 Posts |
Where can I get the 1925 Aussie penny, and what would the cost be?
Thanks.
|
|
Rest in Peace
United States
3730 Posts |
Like Terry, I also have a complete set of the English cartwheels!
Back in the 1960's, I had a "pen pal" who lived in Dublin. He sent me some fantastic UK coinage, including the cartwheel.
|
|
Pillar Of The Community
3147 Posts |
Gary, there are a few of the 1925 Australian pennies on ebay right now. Brace yourself!!! |
|
Pillar of the Community
Australia
853 Posts |
The Aussie 1925 in aaverage circulation grade would set you back about AU$160.00. Most Aussie coin dealers would have them in stock. I have one or two.
|
|
Rest in Peace
United States
3730 Posts |
Thanks for the reply.
I would love to own one.
As a retired teacher, I will have to wait...maybe forever.
However, I'll keep this coin in mind in case I happen upon a sudden "windfall."
|
|
Pillar of the Community
Australia
1529 Posts |
I have seen just almost fine grade ones going for close to $200 bucks, very fine to almost extra fine about the $400 dollar mark. A good mate of mine on the Aussie Forum bought a true extra fine one for $800, but that was a long time ago. I would think it woud be nearer the 1K mark now. Grades above that is when it starts to really hurt the pocket.
|
|
Page 2 of 2
|
Replies: 19 / Views: 10,981 |
Page 2 of 2
|
First Page
Posted 12/20/2005 5:27 pm
