| Author |
Replies: 20 / Views: 4,883 |
Page 2 of 2
|
|
|
|
Bedrock of the Community
United States
19973 Posts |
Great looking coin! 65RB
The hubs/dies were fresh in 1910, I don't think it's a proof but just a business strike. You'll have to check the die markers.
|
|
Pillar of the Community
 United States
1361 Posts |
Either way, I knew I was safe at 46 bucks after shipping...plus it is a big upgrade for my set. I'll get better pics when it arrives, we shall see.
|
|
Bedrock of the Community
United States
94367 Posts |
|
|
Pillar of the Community
 United States
1361 Posts |
The 2 die scratches in unum...just saying though... 
|
|
Pillar of the Community
 United States
1361 Posts |
Same area of a pr66bn listed on ebay. 
|
|
Pillar of the Community
 United States
1361 Posts |
|
|
Pillar of the Community
 United States
4618 Posts |
 to CCF! This die scratch is one of the diagnostics for the matte proof. They point out that other scratches can be seen in this area, but they are due to a damaged master die. This scratch is seen only on the proof. You can find other diagnostic images online. The only way to be 100% sure if the coin is the matte proof would be to have it certified. 
ANA ID: 3203813 - CONECA ID: N-5637 Clean a coin that may be worth collecting? Please DON'T! When in doubt, leave it dirty!! 
|
|
Pillar of the Community
 United States
1361 Posts |
Ah okay, I'd been under the impression it was the die scratch that runs through the right leg of the m of unum. Either way it has a die scratch running off the left leg also. Regardless, the coin is worth encapsulated, so I'll probably send it off eventually anyways.
|
|
Pillar of the Community
 United States
1361 Posts |
I've just never seen a business strike that had the graininess the surface of this coin has...I mean...it is covered in raised dots everywhere. Only thing I can say it reminds me of is some of the zincoins I've seen covered in tiny zinc bubbles.
|
|
Bedrock of the Community
United States
20753 Posts |
Nice coin. I'd just put it in an Album.
|
|
Moderator
 United States
190019 Posts |
Very nice! 
|
|
Bedrock of the Community
United States
10635 Posts |
KYCopperCoins wrote "the graininess the surface of this coin has...I mean...it is covered in raised dots everywhere" This could be indicative of a light cleaning as well. Am I the only one seeing small scratches in the fields of the reverse? 
|
|
New Member
United States
17 Posts |
I am probably way too late to this post but the die scratch on the M on the reverse of the coin runs more EAST TO WEST FROM THE OTHER SIDE OF THE SAME M IN UNUM AND GOES UP OVER THE E IN ONE NOT DOWN IN FRONT I WILL ATTEMPT TO GET A PHOTO POSTED FOR REFERENCE do you still have the coin? Just curious if you found out anything about it since posting it.
|
|
New Member
United States
17 Posts |
 Hope this helps
|
|
Pillar of the Community
United States
992 Posts |
The rims are what interests me. Do appear to be fully squared. Let us know what you found out!
|
|
Page 2 of 2
|
Replies: 20 / Views: 4,883 |
Page 2 of 2
|