2002 Queens Jubilee 50 Cent Coin - Coin Community Forum

To participate in the forum you must log in or register.

Author	Replies: 4 / Views: 1,343
rocky Pillar of the Community Canada 2784 Posts	Posted 02/03/2019 10:57 pm the image I want to show here is a void run along the queens chin. I am at 20 x MAG. the void the smooth metal is a different colour from. the top surface on the queens face plus the bottom surface of the coin. they are both nickle but that smooth metal surface is yellowish. I want to try to see inside that void. I would need a 50 X microscope objective. also I have been reading about die patches. I believe that to the left side of this images is one patch. right there on the edge of that very smooth metal. any thought greatly appreciated. Report this Post to the Staff

DBM Pillar of the Community Canada 9875 Posts	Posted 02/04/2019 12:00 am Anything,either error or variety, that requires more than 4X magnification to see isn't worth collecting. "Dipping" is not considered cleaning... -from PCGS website Report this Post to the Staff
okiecoiner Pillar of the Community Canada 5603 Posts	Posted 02/04/2019 04:29 am I really don't understand what you are trying to explain or to get at. I agree with DBM .... any metallic, stamped product, manufactured by a machine, is going to have minor discrepancies that are well within allowed tolerance. If it takes 20X to partially see it and 40X to get a better look, then it's certainly not an error. Report this Post to the Staff
robmck1967 Pillar of the Community Canada 870 Posts	Posted 02/04/2019 11:49 am as always, we need full pics of both sides of the coin for perspective. Report this Post to the Staff
rocky Pillar of the Community Canada 2784 Posts	Posted 02/04/2019 6:55 pm okiecoiner I am not saying this is and error. what I am saying is, I have only seen this type of condition before on copper coins. I have never this on nickle or a plated coin. why I would like to see in that void. I have seen some thing on a coin. that I need another coin to confirm. it might be away to prove exactly. what Mechanical Doubling looks like. because I have seen it. I want a second coin to prove it. okiecoiner I was just hoping you might be able to explain what might cause this. robmck1967 sorry I finally have a fix for my images here is a couple of full images thank you all Report this Post to the Staff
	Replies: 4 / Views: 1,343

To participate in the forum you must log in or register.

All Forums Category: Canadian Coins and Currency Forums Forum: Canadian Variety and Error Coins

The First Dollar, your premier source for bullion and rare coins. See our bullion list on the site and the coin inventory on ebay.

Silver Gold Bull US is the United States leading bullion dealer. We deliver gold coins, gold bars, silver coins, silver bars and precious metals to your door. Order today!

View Last 100 New Topics

View Last 100 Active Topics

Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited.
Contact Us | Advertise Here | Privacy Policy / Terms of Use

Coin Community Forum

It took 0.29 seconds to rattle this change.