| Author |
 Replies: 16 / Views: 2,222 |
Page 2 of 2
|
|
|
|
Valued Member
 United States
128 Posts |
Yes, I had to look twice as I thought it was an Adams dollar. But no it was a Washington and had to have gone through the edge process twice as it was position 1 and 2 in the same coin. Not the 50/50 deal, but overlapping and hard to read. I have an Adams mint error which I bought. Never heard of this in a Washington dollar. I think that should clear things up....now is it a known error?
|
|
Valued Member
United States
224 Posts |
Alan,
If I am reading your' statement correctly and I believe I have "that your' coin has the inscription stamped both rightside up and upside down on the coin's edge" (i.e. inscription stamped twice with different orientation), then yes it is an error! Some good pictures of the edge showing the inscriptions should settle this matter and clear up any confusion.
Frank
|
|
Pillar of the Community
United States
7629 Posts |
This is an error, and a valuable one from what I understand. Congrats!
|
|
Bedrock of the Community
United States
12437 Posts |
Interesting, I have not heard of double lettering on the Washingtons. It may not be unique but I doubt many of them can be around since their existance is not widely known. Nice find  |
|
Pillar of the Community
United States
3507 Posts |
It may indeed be an error that has gone through the edge lettering process twice and that would be fantastic!
Still, pictures would help as there is another scenario. Two coins rolling against each other in the machine can also impart lettering to each other. The incuse lettering on one coin acts as a die would on the edge of the other coin.
I hope for the first scenario as that would be a nice error!
Thanks,
Bill
|
|
Pillar of the Community
United States
3294 Posts |
|
|
Valued Member
United States
377 Posts |
That is the coolest thing I have seen in a long time  |
|
Pillar of the Community
United States
3077 Posts |
i hate edge lettering but thats one sweet find give ya a dollar for it  |
|
Pillar of the Community
United States
8904 Posts |
Man!! Cool find!!
Congrats!
|
|
Bedrock of the Community
United States
12437 Posts |
Ack! Please do not hold the coin like that any more, fingerprints will ruin the manganese outer layer  The golden planchets are especially susceptible to finger grease as it will permanently etch the print into the coin if not removed immediately. Poor George already has a big print across his collar  Only hold a coin by the edges, never the faces |
|
Valued Member
United States
128 Posts |
He has been gently cleaned with a lens wipe and put into a airtight where the edges can be seen. After all, he came out of a bar where he was left as a tip. So ole George has been around. But he has a good home now. No one has yet to tell me if there are more out there. I did contact Coin World as suggested, but not answer.  |
|
Valued Member
United States
224 Posts |
Alan, Nice pics of the error! Again congrats on such a great find! You should have a pretty pricey error coin there! A good article about the coin and find in Coin World or Numismatic News and having the coin certified, graded and attributed will do much to promote and increase it's potential value. Frank |
|
Pillar of the Community
United States
3098 Posts |
Whoa! First time I've seen one of these!
|
|
Pillar of the Community
United States
3507 Posts |
This is the first time that I've checked this thread in a few days.
Very Nice Error coin. It went through the Schuler Edge Lettering machine twice!
This type of error is known but there is no way to know how many exist. They go through the machine so quickly that a number of them will go through until the mistake is caught.
It is probably in the very scarce to rare range:-) I have seen a few others before.
Again, A very Nice coin and a very lucky find!
Have Fun,
Bill
Edited by foundinrolls
06/02/2009 12:36 am
|
|
Pillar of the Community
United States
3507 Posts |
It would cost over 100 bucks to slab the coin. Why is it that a common first suggestion on an error coin is to slab it? The coin is easily identifiable. I just don't get it. Those who suggest it should pay for the fees:-)
The coin is what it is...it is circulated and slabbing it won't help the overall value of the coin.
Thanks,
Bill
Edited by foundinrolls
06/02/2009 12:35 am
|
|
Page 2 of 2
|
Replies: 16 / Views: 2,222 |
Page 2 of 2
|
First Page
Posted 05/26/2009 09:18 am
