| Author |
 Replies: 23 / Views: 1,317 |
Page 2 of 2
|
|
|
|
Pillar of the Community
United States
2839 Posts |
Wow, super error coin here TB! I asked Mike several months ago if a double struck, in collar, no rotation coin could be determined from observations and he mentioned the partial collar would be key. Yours has some rotation so its easier but so many would disregard this as MD or something. I would love to see the partial collar if you haven't put this one away.
I think about most D/S coins that they may have been struck and then ejected correctly and came back later mistakenly in a batch of planchets to be struck again. This coin would seem to have certainly been stuck in place for two consecutive strikes. Very cool!
|
|
Pillar of the Community
United States
2260 Posts |
Very Nice ! You post some good ones.
|
|
Moderator
 United States
198363 Posts |
Excellent!  |
|
Pillar of the Community
 United States
6214 Posts |
Thanks all for the great comments! Was watching the Steelers lose and now that my football season is over it's back to mostly coin stuff.
I can see about getting a pic of the edge if I have time. The coin won't grade well but it's in the pile for ANACS to get the error(s) on the label. The partial collar is full, not tilted, and a bit smooth likely from the circulation. It is obvious though and not hard to spot. Otherwise I think this one comes down to the basic principal of looking at the devices comparatively. Lots of normal stuff happens like DD and MD, but when things are thicker or in some way seem distorted it's time to get in for a closer look. But certainly glad Mike was willing to take a look at this one to be sure of what is going one. Or should I say what went on?
|
|
Pillar of the Community
United States
6214 Posts |
I don't usually take pictures of partial collars as the product to effort ratio is too low. They all are pretty similar with an offset on the rim. This one shows well under a loupe all the way around but it is flattened enough in most places to look like nothing much under larger magnification. This is the one spot left mostly unscathed.  |
|
Bedrock of the Community
United States
80650 Posts |
Nice Partial Collar. Errers and Varietys.
|
|
Pillar of the Community
United States
2839 Posts |
Thanks for the photo, that is helpful.
|
|
Moderator
United States
198363 Posts |
Nice imaging! |
|
Bedrock of the Community
Canada
10066 Posts |
Yep nice coins and you know where to find them, congrats
|
|
Pillar of the Community
United States
5196 Posts |
|
|
Pillar of the Community
United States
6214 Posts |
Thanks all! Pretty interesting coin and happy to share it.
|
|
Pillar of the Community
United States
6214 Posts |
ANACS returned this coin unholdered with the note "unable to verify the variety requested for this item. Odd.
|
|
Bedrock of the Community
United States
80650 Posts |
That's weird.  Errers and Varietys.
|
|
Pillar of the Community
 United States
9074 Posts |
Did you make somebody mad at ANACS? -makecents-
|
|
Pillar of the Community
United States
5929 Posts |
I must have missed this beautiful coin the first time around. I think it's neat that the second strike isn't visible on TRUST, seeing how strong and clear TRUST is. Do you think it went with the struck through" material? That is a very odd determination on their part since its an error & not a variety. I'm guessing you sent a copy of Mike's assessment with it. If so, It makes me wonder if the ANACS attributes might have a chip on their shoulder over his determination overshadowing their attribution. I had a similar incident with a variety submission 2 years ago to them. Seven out of forty came back with no attribution  , and my ID tags were not returned, as requested on the form. I felt they were discarded intentionally, so that their attribution could not be challenged. I re-attributed them, but was so disheartened & busy I have not sent them back in yet. Words of encouragement are one of the major food groups.
We need to consume them regularly to thrive and grow.
|
|
Page 2 of 2
|
Replies: 23 / Views: 1,317 |
Page 2 of 2
|
First Page
Posted 01/12/2026 10:55 am
