| Author |
Replies: 22 / Views: 2,725 |
Page 2 of 2
|
|
|
|
Bedrock of the Community
United States
20753 Posts |
DO NOT attempt Olive Oils, WD-40, Jewlery cleaners, Ketchup or the many other weird things people may recommend. Many say to use those things since not their coin, they don't care if you ruin it. If you ruin it trying some of those things, those people that said so will just say, Oooopps, to bad, oh well it's your's not mine. As already noted, the best is Acetone. Of course you could just try some distilled water first. Place a coin in glass container and heat very, very gently. If this dosn't work, then try the Acetone. Note this. First place the Acetone on a clean Glass dish. Allow to evaporate. If there is any residue, the Acetone is contaminated, so discard and don't use on coins. If clear, allow the coin to sit in a GLASS dish with the Acetone for a few minutes. Remove, rinse with distilled water, place on a cotton cloth and blow dry with a hair dryer on low or no heat. Only use glass containers, never a metal pan or pot. DO NOT use metal utinsils such as a spoon to add or remove the coin. Try to use glass for all. That is a nice coin so be carefull with it. If all fails, I would leave it alone after that. Old saying "let sleeping dogs lie". Just make sure you place it in a place with as little air as possible. 2x2 or something. Nice coin.
|
|
Bedrock of the Community
United States
20753 Posts |
OH! I forgot. If that green stuff bothers you another solution would be to just send that coin to me. Free of course. 
|
|
Pillar of the Community
 United States
1582 Posts |
Carl, you have quite a sense of humor :) Doesn't bother me that much - just would like for it to go away as the coin still has some nice detail. For those who inquired - no, the mint luster doesn't show; however, who knows what might lie beneath 75 years of buildup. I'll try to get to the hardware store today, and pick up a can of pure acetone. I'll let y'all know what happens after a nice soak.
Ralph
|
|
Valued Member
United States
440 Posts |
Please be careful. That is a key date coin. Try acetone and if that doesn't work just leave it, dont rub,scrub or use anything but acetone, distilled water and a blow dryer. You have a coin worth a few hundred there. PLEASE USE CAUTION.
|
|
Pillar of the Community
 United States
1582 Posts |
Yup grovey, that's all I'm gonna do - getting some pure acetone today, got distilled water in the refrigerator, but I'll have to let it air dry - completely bald, and don't have much need for a hair dryer. :) It was a nice find, wasn't it?
Ralph
|
|
New Member
United States
21 Posts |
You can actually dry it with a thick soft towel if you gently pat it instead of rubbing it. But what works very well for me is compressed air. I used to use a hand pump like you use for camera lenses but now I buy canisters of compressed air form an office or computer supply store and use it to dry coins as well as to blow debris or dust out of capsules and from the surface of coins before encapsulating them.
|
|
Pillar of the Community
United States
1267 Posts |
Sorry, I don't agree with those who say the use of wd-40 will ruin a coin. Please see this link. Often times the perceived bad reputation a substance has is worse than the reality, but if that's what you want to believe... http://www.whitlowltd.com/updates.html "Removing residual sticker gum - Use WD40 (yes WD40!) to remove the residual gum left behind on holders when stickers are removed. We have all tried many things to remove this "goo", most do not work! WD40 works like a charm! Don't ask how we figured this one out, don't remember." It is a substance which is used commonly in cleaning ancient coins and valuable weapons and when vexed with verdigris on a coin WD-40 will do the job. "If not scrubbed after application" it won't remove the skin or tone of a coin or the bluing of a rifle. Ben
Edited by Bonedigger 09/05/2007 11:50 am
|
|
Pillar of the Community
 United States
1582 Posts |
Maya - great idea. I have an airbrush and compressor I use in my leatherwork - I'll give that a shot and see how it does. Thanks.
Ralph
|
|
Valued Member
United States
440 Posts |
What did you pay for it ? Here is my 32s ef40 in pcgs plastic. Bought at the Charlotte ANA show in March. Paid $210 I believe.  
Edited by grovey 09/05/2007 1:55 pm
|
|
Bedrock of the Community
United States
20753 Posts |
Bonedigger. Please remember some of the following. First of all the usage of WD-40 or other such chemicals, used on numerous coins of different materials and different contamenates, anything can be the results. Many products such as WD-40 have manufacturing tolerances in their formulae. Also, they occationally change such formulae to comfuse the compitition. What you purchased yesterday may be different than what you purcahsed a week ago. This means that what MIGHT work with and for some may have horrible results for others. The type of contaminate on a coin can vary extensively and the addition of a solution of the wrong type can ruin a coin further. Many blurt out names such as PVC or Vertigris without knowing what the substance may in reality be composed of. The point it if you do not know what the contaminate on a coin is, do not know the exact formulae of a solution, don't allow experiment with a valuable coin. Next when anyone on the internet tells me they did this or that and it came out perfect, I always remember an old saying. Believe nothing of what you hear and half of what you see.
|
|
Pillar of the Community
 United States
1582 Posts |
Okay folks - these scans show what it looks like after about a half hour in pure acetone, distilled water rinse, and blow dry with my air brush. The green is gone - I'm happy - not going to do anything more to it. I appreciate all your help and suggestions. You guys are great!! Thanks. Ralph Image: rescan.jpg24.18 KB Image: rescan2.jpg35.18 KB
|
|
Valued Member
United States
440 Posts |
Not bad. Glad you didn't monkey with it anymore. What did you pay for it ? Are you gonna get it slabbed.With a key date I SURE WOULD.
Edited by grovey 09/05/2007 10:49 pm
|
|
Pillar of the Community
 United States
1582 Posts |
Grovey - I spent $132,50 for it - most I've ever paid for any coin in my short two and a half year career as a coin collector. I've never given much thought to getting any of my little collection slabbed. For me, right now, the thrill is in the collecting, the hunt, the chase, whatever you want to call it. Maybe, somewhere down the road, I'll get bit by that "investment bug" and start worrying about how much my collection is worth, but, for now, the real thrill for me is in finding that particular coin I've been wanting at a price I can afford. Now, that's not intended to take anything away from those who choose to have their coins graded and slabbed by a TPG - to each his own. I just find it more enjoyable to try to grade my own coins based on the books I've bought, photos of other coins in certain grades, and the help I receive here in this forum. I think I'm starting to get a toehold on it. Ralph
|
|
Rest in Peace
United States
2884 Posts |
Hi Bonedigger! I read the link you provided and I can't find anywhere where they endorse the use of WD40 on coins, only sticker residue on holders. Did I need to link to somewhere else or is the paragraph following theirs your words and not theirs? I'm curious how safe this product would be on a coin. Thanks, Mike 
|
|
Pillar of the Community
United States
1267 Posts |
Edited by Bonedigger 09/06/2007 07:35 am
|
|
Page 2 of 2
|
Replies: 22 / Views: 2,725 |
Page 2 of 2
|