| Author |
 Replies: 16 / Views: 1,055 |
Page 2 of 2
|
|
|
|
Valued Member
 United States
134 Posts |
@john1 - Are you thinking tampered with or clipped by someone?
|
|
Pillar of the Community
United States
3179 Posts |
 A rim would never form where that piece was missing, or clipped. |
|
Bedrock of the Community
United States
94367 Posts |
Agree this is questionable.
|
|
Bedrock of the Community
 United States
10566 Posts |
Looks to be too worn to tell for sure. Maybe the "pseudo" rim was just metal movement building up from circulation? On the obverse is that the Blakesley effect or just rim wear?
|
|
Bedrock of the Community
United States
94367 Posts |
How would metal build up from circulation?  |
|
Bedrock of the Community
United States
10566 Posts |
Quote:
How would metal build up from circulation? From that flat edge contacting other surfaces and rolling the metal up onto the fields - whether those other surfaces would be other coins, cash register drawers, etc. Was just throwing the idea out there for discussion. |
|
Moderator
United States
56855 Posts |
Quote:
@john1 - Are you thinking tampered with or clipped by someone? That's the same thing. Even with the wear I think it is not a genuine incomplete planchet. John1 |
|
Bedrock of the Community
United States
94367 Posts |
@Marve - sorry, inconceivable. C'mon.
|
|
Bedrock of the Community
United States
10566 Posts |
Quote:
@Coinfrog: "sorry, inconceivable. C'mon." That's the exact same thing the naysayers told the Wright Brothers...  EDIT: Just another thought - Don't the rims of Dryer Coins get pushed up higher onto the coin from making contact? After all, this coin is 104 years old and has had alot of contact.  Edited by Marv65
02/16/2024 7:20 pm
|
|
Pillar of the Community
United States
3848 Posts |
Clearly not a clipped planchet. You can even see the coarse sanding lines on the edge. The rim that comes close to the clipped portion would taper down, visible even on worn examples.
Suffering from bust half fever. Want to learn how to attribute early half dollars by die variety? Click Here: http://goccf.com/t/434955Shoot me a PM if you are looking to sell bust halves. |
|
Bedrock of the Community
United States
10566 Posts |
Please note: I'm not arguing just asking a question...... This is also on ebay and kinda looks like the same type of clip/damage as the OPs coin. Would this be a fake also?  EDIT: Spelling Edited by Marv65
02/16/2024 8:41 pm
|
|
Pillar of the Community
 United States
6535 Posts |
Marve, can you post the ebay link so we can see both sides of that coin? I am not seeing any Smith effect, nor the Blakesley effect. Sometimes it is stronger on one side than the other. But neither example seems to have metal flow from the devices towards the gap. They look cut or ground, pushing up metal above the field in both directions. |
|
Bedrock of the Community
United States
10566 Posts |
Edited by Marv65
02/16/2024 8:53 pm
|
|
Bedrock of the Community
United States
74504 Posts |
|
|
Pillar of the Community
Canada
1766 Posts |
Looks like the edge was ground down. |
|
Page 2 of 2
|
Replies: 16 / Views: 1,055 |
Page 2 of 2
|
First Page
Posted 02/16/2024 5:17 pm
