i used a 1" drum sander and just angled the piece with the holes in it to sand out a notch, practice on a scrap piece of wood first, it is pretty easy to do..
Yes, correct. Since I also have the CC&C cases , wanted to confirm.
Strange that no manufacturer makes the same quality case for round capsules (with glass top or without), for 38mm or other sizes coins.(there are not a few on ebay or AirTites.com , but the quality is not the same)
@silveroid:there is a nicely made mahogany glass lid with a foam insert you can get...do you know where just to buy the foam insert ....then It would be easy to change out the inserts...and cut your own to fit your coins
Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited. Contact Us | Advertise Here | Privacy Policy / Terms of Use