A close up image of the date area with the date that matches the coppercoins coin will help more. Location and mint mark shapes must match. Markers mean nothing if the variety is not present on your coin.
The Variety Vista RPM-001 is not the same listing as the coppercoins example. But note on the coppercoins listing it is a SE example:
Quote: Large Date Copper. Part of an extra punching shows beneath the center of the primary mintmark.
You image does not show the the SE area. If you are looking at the upright on the mint mark, that is not the RPM. So either your image is not showing that area or was cut not to show that area. That is the area to check. If the RPM is not there, then it is not from the same die pair.
On your coin there is not SE RPM on your coin. That has to be there for it to be from that obverse die. Again. Markers mean nothing unless it is on a variety die. Also note the mint mark normal shape is different than your coins mint mark.
Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited. Contact Us | Advertise Here | Privacy Policy / Terms of Use