| Author |
 Replies: 41 / Views: 13,493 |
|
|
|
New Member
United States
5 Posts |
That IHC is owned by a California dealer Charmy who goes by the name of ThePennyLady on the PCGS boards. |
|
Bedrock of the Community
United States
12437 Posts |
Well, I am now an ex-owner of a doily label sample slab  When ebay was running their free auction insert deal a few months ago, I listed it to see what kind of interest it would attract. Started out at a 39.95 opening bid and it ended at around $50, not too bad for a $4 purchase  |
|
New Member
United States
5 Posts |
I had 15 of them when I sold out, wish I'd kept them.
|
|
Pillar of the Community
 United States
1534 Posts |
Quote:That IHC is owned by a California dealer Charmy who goes by the name of ThePennyLady on the PCGS boards. Yeah, I remember seeing the coin on the PCGS boards and immediately deciding to use the coin as an example in this thread, given how attractive the coin is. |
|
Pillar of the Community
United States
2150 Posts |
Quote:
AS for the multicoin holder I do not think I have ever seen one of those from PCGS. Found this on the web:  And this:  Edited by jokingjoker
11/17/2010 8:50 pm
|
|
Bedrock of the Community
United States
17884 Posts |
I just noticed that Biokemist's sample doilie slab was a damaged one. The doilie's were part of the group of "slab within a slab" varieties. The slab was one of the old rattler slabs, with a hologram, enclosed within a separate wraparound outer plastic band that went around the edge. It enclosed the slab but was not connected to it. You can see it on the picture of Bryans Morgan, but someone has broken it off of the slab on biokemist's Sample
|
|
Bedrock of the Community
United States
12437 Posts |
Yep, you are right Conder, it was flat just like my rattlers. Other than a couple minor scuffs the slab was in perfect condition so I had no idea anything else was ever attached  Oh well, at least the buyer was happy with it  |
|
New Member
United States
5 Posts |
Here is another example of the double holder concept of which the doily is one.  |
|
Bedrock of the Community
United States
17884 Posts |
That is actually a fairly scarce holder. It has the wraparound band that they used for the transitional slabs, but it has the label that was used in the next generation (PCGS 4). There were four different varieties of the wraparound "slab within a slab" holders. Dot Matrix without PCGS on the front label, With PCGS on the front label, The Doilie label, and this one with the large font serial number on the die cut green label. (The first three have perforated edge labels) All four of these were produced during the last two months of 1989. The die cut is probably the scarcest but the Doilie is in higher demand.
|
|
New Member
United States
5 Posts |
I'm told that the position of the bar code with respect to the coin number/cert number line is important with some of these early slabs. The example above where the bar code is left of the coin number is supposedly more scarce than the identical slab/insert where the bar code is even with the coin number line. Then again, one can find both examples within the doily label itself. Not sure if this is two different design examples or just carelessness when printing the label.  |
|
Pillar of the Community
United States
7840 Posts |
My apologies for reviving an old thread, but I just picked up a "doily" and have a question about it. It appears to be a clam shell type exterior holder that is loose on at least the lower right hand corner. Is that normal? It seams to be damaged to me, but this may be the norm? I am not getting that 'joy-joy" feeling that I thought a doily would bring.
No images uploaded yet, nothing special, just a common MS63 Morgan.
Edited by oih82w8
05/12/2015 1:47 pm
|
|
Bedrock of the Community
United States
17884 Posts |
As mentioned above the Doily ws one of four varieties of "slab within a slab" holders that used the small sized shell from the first genration rattle slab which was then encased within a wraparound plastic band. around the edge. That wraparound band is NOT physically attached to the inner slab, it just wraps around it. So it is lose and can be flexed.
|
|
Pillar of the Community
861 Posts |
 Not worth much. I just sent it out as a freebie on one of my ebay sales this month. |
|
Pillar of the Community
United States
7840 Posts |
Sounds like this one is missing the "wrap band" which keeps it together.
Edited by oih82w8
05/12/2015 1:48 pm
|
|
Bedrock of the Community
United States
17884 Posts |
Quote:Not worth much. I just sent it out as a freebie on one of my ebay sales this month. Not a doily, first generation rattler. Or the first generation of the "slab within a slab" varieties that has had the outer band broken off. Can't tell for sure without seeing the back of the slab. |
| |
Replies: 41 / Views: 13,493 |
First Page
Posted 11/17/2010 5:11 pm
