| Author |
Replies: 11 / Views: 412 |
|
|
Pillar of the Community
United States
775 Posts |
|
|
|
|
Bedrock of the Community
United States
78128 Posts |
I'll take a guess and say AU-55.
Errers and Varietys.
|
|
Pillar of the Community
United States
3454 Posts |
|
|
Pillar of the Community
United States
7265 Posts |
With the every limited knowledge I have towards this series I'll just throw this out there and see if it sticks  MS-62 
|
|
Pillar of the Community
Australia
605 Posts |
|
|
Bedrock of the Community
 United States
18869 Posts |
yowza  i think this one is a tad better than the 05. I'm also going with MS64
|
|
Pillar of the Community
United States
3718 Posts |
That is an absolutely gorgeous coin.
I see very slight rub on the obverse, but no matching rub on the reverse. That seems consistent with cabinet rub. The luster is fantastic. I see only one scratch, on the reverse at 8 o'clock, and scratches always look larger than they are on enlarged photos of smaller coins. To my eyes, this looks like MS-63+ or MS-64.
Fantastic coin.
|
|
Pillar of the Community
 United States
775 Posts |
For those of you who guessed MS(64), you were right on! CAC apparently agrees!  I have seen this greenish spot that I circles in blue in the lower right side of the reverse--it doesn't always show up clearly--only from certain angles. Is this technically verdigris? PCGS and CAC are both fine with it--given how insanely small the spot is on an already small coin, but I'm curious as to the nature of this "green" spot that looks to be different from regular toning. 
|
|
Bedrock of the Community
United States
78128 Posts |
Nice grade! 
Errers and Varietys.
|
|
Bedrock of the Community
 United States
18869 Posts |
such a tiny little spot. good eye, great grade and great acquisition. although there are several contaminants that can cause verdigris, the only ones that I can see this coin being exposed to is a pvc laced holder long enough to impart that (doubt that). it could be a metallic inclusion or discoloration from minting materials since its such an early piece. the other option is being improperly stored in a high humidity environment. for me, this is the most likely cause. looking around the coin quickly, I see at least two spots that could end up like that one. a small amount condensation sitting on the surface in an airtight holder for an extended period of time. 
|
|
Pillar of the Community
 United States
775 Posts |
Thanks @panzaldi. It's not a problem, right? I just looked at the green spot through a loupe and couldn't find it. I live in Missouri, which is humid, although the coins usually live in a safe deposit box, and have spent some time in air conditioned facilities. Do you think these spots will spread?
|
|
Bedrock of the Community
 United States
18869 Posts |
Quote: Do you think these spots will spread? n an airtight holder, the spread is unlikely if the holder is completely sealed and the coin was dry. Verdigris is a surface corrosion product, it doesn't "live" like mold. It can only form if the coin's surface is exposed to moisture, oxygen, and/or reactive chemicals. In a sealed, dry environment, these conditions are absent, so the corrosion won't progress or transfer to other coins. just to be safe, avoid storing it with paper, cardboard, PVC, or other materials that can release moisture or chemicals even in a sealed environment like a safe. my bet is that it is stable at this point but since you have some high def photos, I would set a tickler in my phone to inspect the coin at least once a year taking photos, and comparing to these ones. if there is any sign of changes to the surfaces anywhere, I would be inclined to send it in for conservation or at least consult with someone more knowledgeable with this. I am not familiar enough with that process as to what would happen to the original holder and verbiage on it along with the bean.
|
| |
Replies: 11 / Views: 412 |
|