| Author |
 Replies: 16 / Views: 2,527 |
Page 2 of 2
|
|
|
|
Pillar of the Community
Australia
3831 Posts |
Perhaps if they are lacquered and if they are indeed red, leave them as they are. You will never know that if you strip the laquer off, the coins will start to oxidize, which is not a good idea. Do wait around and see what others think.
|
|
Member
United States
703 Posts |
Leave them alone and advertise them for what they are, great BU examples that have been well preserved. In your description say that the buyer can leave the cent as is or use acetone which will dissolve the lacquer without hurting the copper. Best of both worlds with less work.
Edited by Errorcoins
01/09/2007 12:42 pm
|
|
Pillar of the Community
United States
7123 Posts |
The practice of lacquering coins was acceptable at one point in history. I have many single examples of this in my collection . put the set up with a reserve, check the market and see what happens,, but I would not alter the coins any further by trying to clean them. (I understand now, that the Lincoln Penny, oooppss - cent) You can call them pennies if you want to ,, Just add United States in front so that those of us with limited vocabularies will be able to follow the information.  Metalman |
|
Pillar of the Community
 United States
2600 Posts |
quote:
Originally posted by Metalman
The practice of lacquering coins was acceptable at one point in history.
I have many single examples of this in my collection .
put the set up with a reserve, check the market and see what happens,, but I would not alter the coins any further by trying to clean them.
(I understand now, that the Lincoln Penny, oooppss - cent)
You can call them pennies if you want to ,, Just add United States in front so that those of us with limited vocabularies will be able to follow the information.
Metalman
Metalman, sure hope you know I am just having fun. I have butchered more words than Attila the Hun has enemies. Thx for your help, I really appreciate it. Jim
|
|
Pillar of the Community
United States
2600 Posts |
Thx very much to everyone. I think I have a good idea what to do, now. I sure hope all of you know how much help you are to the new guys on the block, like me.
Jim
|
|
Rest in Peace
Australia
661 Posts |
Jim, The Australian Mint used lacquer on its Mint and Proof sets in the mid 90s, they stated such on the packaging. I don't know if they stopped doing it or just stopped advertising it. FYI, regards,
|
|
Valued Member
United States
287 Posts |
A lot of collectors will consider the lacquered coins perfectly acceptable. I would be concerned that if you tried to remove the lacquer that the result may be worse than if they were left as is.
|
|
Pillar of the Community
United States
1304 Posts |
tell me more about this lacquering. I have never heard of this.
|
|
Pillar of the Community
Czech Republic
803 Posts |
I like lacquered coins, since there might be some vivid toning hiding underneath. I'm not the kind to keep the lacquer on, but I don't see a problem with others doing so.
|
|
Pillar of the Community
United States
2600 Posts |
quote:
Originally posted by busthalf
tell me more about this lacquering. I have never heard of this.
Hi Busthalf, Yrs ago, it was apparently both acceptable and almost standard practice to lacquer coins to try and preserve them and or stop oxidation. I also believe there was a stronger tendency to lacquer copper coins as they tend to be more reactive. Jim |
|
Pillar of the Community
United States
2600 Posts |
[quote]Originally posted by muckeye
Jim, The Australian Mint used lacquer on its Mint and Proof sets in the mid 90s, they stated such on the packaging. I don't know if they stopped doing it or just stopped advertising it. FYI, regards,
[/quote
Thx Bob, I sure did not know this. One more piece of good info to file away. Jim
|
|
Pillar of the Community
United States
1304 Posts |
|
|
Bedrock of the Community
United States
20753 Posts |
Way, way back when I was a kid it was really common to coat coins to preserve them. Some embedded them in liquid plastic, lacquered them, coated them with oils, etc. I still have some from when I was a kid that are embedded in plastic. That may not even be lacquer. It may be a varnish, plastic coat or something else. If you try to remove it and don't know what it is you may end up with a bigger problem than you think. Some chemicals just don't act nice when mixed. Acetone will disolve many substances but it will also react with some in a not so nice way. If you do not know what is on the coins, I would strongly suggest leaving them as they are.
|
|
Rest in Peace
Australia
661 Posts |
Jim, re the lacquer on the Aust. mint sets. It is a product developed by American aerospace industry, a clear lacquer finish (spray can) called 'Incralac'. I have used it with good results, virtually unnoticable, even under magnification.
|
|
Pillar of the Community
United States
2600 Posts |
quote:
Originally posted by muckeye
Jim, re the lacquer on the Aust. mint sets. It is a product developed by American aerospace industry, a clear lacquer finish (spray can) called 'Incralac'. I have used it with good results, virtually unnoticable, even under magnification.
Thx again, Bob. Jim |
|
Page 2 of 2
|
Replies: 16 / Views: 2,527 |
Page 2 of 2
|
First Page
Posted 01/09/2007 12:41 pm
