| Author |
 Replies: 18 / Views: 2,931 |
Page 2 of 2
|
|
|
|
Pillar of the Community
 United States
2311 Posts |
|
|
Pillar of the Community
1751 Posts |
Wait, it's a PCGS slab right? If so, go to your favorite local car parts store and find some headlight polish. Follow the directions exactly. It takes about 10 minutes but with that and some elbow grease, it will look GREAT.
|
|
Pillar of the Community
United States
2311 Posts |
Yes it's PCGS slab, Thanks!
Does it work on NGC too?
|
|
Pillar of the Community
1751 Posts |
Apparently not, but I've never tried.
|
|
Pillar of the Community
United States
2311 Posts |
I will try it once I buy the stuff.
Might be a little while though.
|
|
Pillar of the Community
United States
9792 Posts |
I'm seeing some ticks on the reverse that would probably keep this one out of a MS64 holder, that and the weaker strike. You can always try the crack out game, but remember the coin could come back at a lower grade, or even be detailed for a cleaning. I've had just that experience on a really nice 1885-CC morgan, I sent in once came back body bagged due to PVC residue, then tried again got it in a MS63 holder, cracked it out came back in a MS62 holder, cracked it out, sold it raw to a client, he sent it in first try he got MS64 - where I thought it should have been all along, DOH.
PCGS will also take the coin in for a fee of course and just reholder it in a new holder for you. That way you don't take the chance of loosing the MS63 grade.
"Buy the Book Before You Buy the Coin" - Aaron R. Feldman - "And read it" - Me 2013! ANA Life Member #3288 in good standing since 1981, ANS, Early American Coppers Member (EAC), Colonial Coin Collectors Club member (C4), Conder Token Collector Club member (CTCC), Civil War Token Society (CWTS) member, Liberty Seated Collectors Club (LSCC) & Numismatic Bibliomania Society member (NBS), USMex, Member in good standing, 2¢ variety collector. See my want page: http://goccf.com/t/140440Edited by westcoin
09/13/2013 9:21 pm
|
|
Pillar of the Community
Canada
2805 Posts |
Quote:
If I knew the slab was junk, I would have passed on this. Really?! |
|
Moderator
 United States
23522 Posts |
You can expect Barber dimes to be *very* strictly graded; that's just how the TPG's treat this issue. There's no way to tell what the outcome of a crackout would be by these images, because of the condition of the slab. I'm thinking that polishing the slab will help, but the bottom of the reverse will still be somewhat obfuscated. The "headlight lens polish" recommendation is a very good one and the best thing for you to do, but it will only improve the slab and not the coin. The difference between MS62 and MS63 for this coin is not great enough to really matter. It's a beautiful coin in either grade; worry more about the presentation than the number on the slab. |
|
Pillar of the Community
United States
2311 Posts |
@nalaberong, I should have added more information in my post.
Let me state it this way;
The coin was bought from a dealer at a flea-Market. I have bought from him before but his slab's sometimes are damaged.
I just don't know how I didn't see it was that bad. But when you hold the slab in hands,under low light it don't show the scratches.
When I bought the coin, it was under low lighting conditions. So therefore that must explain why I didn't see the back of the slab was scratched from cleaning it without using a 100% cotton cloth. Sometimes I just forget to type the rest of the words, lol.
And it's not really that bad, I'm more of just imagining it, haha.
@Dave, Pretty helpful information!
@west, it's MS-62.
Also, when I polish the slab, I will post it here.
|
|
Pillar of the Community
United States
2540 Posts |
|
|
Pillar of the Community
United States
2311 Posts |
|
|
Pillar of the Community
United States
2311 Posts |
Goods news and bad news  Will update when the sunlight is shining so I could take photo's. Bought number two.  Edited by solotime
09/28/2013 5:49 pm
|
|
Pillar of the Community
United States
2311 Posts |
    Bad newsDon't work too well on NGC. Takes about 3 coats to work the best. The scratches on the slab were to hide the mark on the back. Good newsTakes about 85% scratches out with three tries. Takes maybe 15% scratches out on NGC with 3 tries Not too expensive. |
|
Moderator
United States
23522 Posts |
Worked well enough for me to opine that you've got a shot at 63 with it. All the same, I'd advise against; that spot on the reverse in the field above ONE might cause a TPG to panic and give it Details. Thank you for experimenting with headlight polish; you've just provided a Searchable result for people who are inquiring about the practice down the road. |
|
Pillar of the Community
United States
2311 Posts |
Your welcome Dave. But I been thinking of having my friend send it for CAC. You think that's a much better route?
But for anyone who wants to try this must use a 100% cotton cloth. Otherwise you will scratch the slab. I picked up a kitchen 100% cotton cloth for $1.98
When applying the stuff, it's recommended to use gloves and avoid contact from skin. It will make your skin feel likes it's burning. I learned my lesson.
Also you must wear a mask to prevent from breathing it in.
Or will cause headaches. Once you wipe the stuff off, it don't seem to have any risk to cause health problems.
I will be putting some more on to take that light scratch out from the front.
Edited by solotime
09/28/2013 6:20 pm
|
|
Page 2 of 2
|
Replies: 18 / Views: 2,931 |
Page 2 of 2
|
First Page
Posted 09/13/2013 5:52 pm
