| Author |
 Replies: 26 / Views: 4,707 |
Page 2 of 2
|
|
|
|
Pillar of the Community
Canada
2784 Posts |
Nikon when I look at your coin on the queens neckle. is that a die clash of the wing from the goose. coming through on her neckle. the curl on the surface of your coinon the bust. I wonder if that might have been a piece of slag. that may have dropped on to the die face before pressing. but check your coin to see if that is a die clash. I see it on the queens neckle.
|
|
Valued Member
 Canada
185 Posts |
Sorry not sure what you mean by neckle... necklace?
|
|
Pillar of the Community
Canada
2784 Posts |
nikon you take very good photos. if you want to take even better photos. come on to the coin photography group. it is part of the forum. they helper myself a lot with taking images. the coin I am putting up has 4 levels of strikes. so when you check coins there is a lot to look for. if you get a chance come and see.   |
|
Pillar of the Community
Canada
2784 Posts |
the last image you put up there appears to be a wing on the queens neck. if the wing is there. that would meed you have a die clash as well. I see it very clearly. so it got to be there. nice coin
|
|
Valued Member
Canada
185 Posts |
Do not see it on the Coin. Artefact of the picture... is my guess.
|
|
Pillar of the Community
Canada
2632 Posts |
|
|
Valued Member
Canada
185 Posts |
|
|
Pillar of the Community
 Canada
9874 Posts |
Only to satisfy your own curiosity.
Error or not you will never recoup the cost of grading.
"Dipping" is not considered cleaning...
-from PCGS website
Edited by DBM
08/03/2016 02:05 am
|
|
Valued Member
Canada
185 Posts |
Hrm... not ever going to sell the coin. so it would be worth it then
|
|
Pillar of the Community
United States
4233 Posts |
The base of the T looks damaged where the "scratch" begins. I'm thinking dremel or some kind of engraving tool.
|
|
Valued Member
Canada
185 Posts |
Finally took it to a LCS, they said it was some sort of planchet error... so with the 5 die cracks not pictured it has 6 errors.. cool.
|
|
Pillar of the Community
Canada
2632 Posts |
You can't always believe your LCS. I see zero errors on your coin, how could you have die cracks not pictured..? we can see both sides of the coin so if there are cracks they must be near microscopic.
As mentioned the scratch on the 'T' is obvious.
The only reason the toning is different in those areas is because of the age of the coin compared to the age of the scratch.
I could easily duplicate what I see in your pics, it really wouldn't take too much effort and that includes the color differences.
Just my opinion
|
|
Valued Member
Canada
185 Posts |
Look at the bottom of the bust... right around the folds of the fabric.
By not pictured I meant that I did not take a photo through a loop or crop to zoom into those die cracks because they are plain as day to me and did not need to get an opion on them... and again as I said before the color differences you see in the line are from light reflecting differantly off the effected area, and is not there under normal lighting conditions...
|
|
Pillar of the Community
Canada
1461 Posts |
Without seeing the die cracks, I'm not sure how someone would think this would be a planchet error based on what we see in the pictures. The mark would likely come across the effigy if that was the case (not on either side). You can also clearly see that whatever made the mark also went slightly over the bottom of the letter "T". Anyways, if you are confident it's an error, send to CCCS to have it attributed that way.
|
|
Valued Member
Canada
185 Posts |
 there is a photo of the die cracks.. .best I could get... I should give some provenance of the coin as well. I suppose... It was given to me by my mother a few days ago (same day I posted the topic actually) and had been kept in a jewlery case for the past 45 years... Only reason I did not mention before is I wanted the unbiased opions of the community. Edited by Nikon
08/03/2016 11:55 pm
|
|
Page 2 of 2
|
Replies: 26 / Views: 4,707 |
Page 2 of 2
|
First Page
Posted 08/01/2016 5:51 pm
