| Author |
 Replies: 17 / Views: 1,922 |
|
Valued Member
Canada
342 Posts |
|
|
|
|
Bedrock of the Community
 United States
94367 Posts |
|
|
Pillar of the Community
 Canada
5418 Posts |
Yes, looks funky with the "crease" going through the design.
|
|
Pillar of the Community
Canada
1533 Posts |
|
|
Pillar of the Community
United States
5757 Posts |
Seeing it is on both sides I would say yes - incomplete clip.  |
|
Bedrock of the Community
United States
59580 Posts |
Not PMD. It's an Incomplete Clip. Nice find.  Errers and Varietys.
|
|
Bedrock of the Community
United States
12442 Posts |
There doesn't seem to be any displacement of the metal within the design elements, so it certainly appears to be a pre-strike condition.
In Memory of Crazyb0 12-26-1951 to 7-27-2020
In Memory of Tootallious 3-31-1964 to 4-15-2020
In Memory of T-BOP 10-12-1949 to 1-19-2024
|
|
Pillar of the Community
Canada
5418 Posts |
Well, there are a few guys up above that know more about this than I do, so I take back the comment that it looks funky. It's probably a clip from the comments above.
|
|
Moderator
United States
164145 Posts |
Nice example! |
|
Moderator
Canada
10437 Posts |
This is a legit error, the proper terminology is "struck on an incomplete punched planchet". There are lots of examples in this Canadian sub-forum. Quote:
A vise job of some sort. Frog, tell us you know nothing about Canadian planchet errors, without telling us you know nothing about Canadian planchet errors. Stay in your own lane. "Discovery follows discovery, each both raising and answering questions, each ending a long search, and each providing the new instruments for a new search." -- J. Robert OppenheimerContent of this post is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported License. See: http://creativecommons.org/licenses...0/deed.en_USMy ebay store
|
|
Moderator
United States
71962 Posts |
That is certainly something I have never seen, but have to agree with the majority above of an incomplete clip. Seeing how both sides line up perfectly and it appears that a sharp edge cause the arc on both sides.
How does even occur?
|
|
Moderator
Canada
10437 Posts |
"Discovery follows discovery, each both raising and answering questions, each ending a long search, and each providing the new instruments for a new search." -- J. Robert OppenheimerContent of this post is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported License. See: http://creativecommons.org/licenses...0/deed.en_USMy ebay store
|
|
Pillar of the Community
United States
5328 Posts |
Interesting planchet error. I've never seen one before. Are they more common in Canadian coins than US coins for any reason? |
|
Valued Member
United States
457 Posts |
I have several examples in both U.S. and Canadian. Doesn't seem to be a big difference between the two countries but I would have to go with U.S. being more available.
|
|
Moderator
Canada
10437 Posts |
Zimmy, considering that the US probably strikes an order of magnitude more coins in each denomination more than Canada, the probability is a lot higher for a greater population of errors. There are some crazy cool errors I see in US coins, that I can only dream of for a Canadian counterpart. "Discovery follows discovery, each both raising and answering questions, each ending a long search, and each providing the new instruments for a new search." -- J. Robert OppenheimerContent of this post is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported License. See: http://creativecommons.org/licenses...0/deed.en_USMy ebay store
|
|
Valued Member
United States
457 Posts |
SPP.....I agree with your reasoning. Since I actively collect both countries, there are some things that I can't explain as to why a particular error type is much more scarce for Canada and not the other (even taking the fact that mintage figures are significantly higher for US coins). For example, why are there so many more off center US coins. Why isn't there more Canadian Cuds. Why aren't there more wrong stock errors on Canadian, or coins struck on rolled thin or thick planchets. One of the areas that Canada seems to produce more in relative terms is wrong planchet errors and small curved clips. I do think there are more US incomplete punched coins but there does seem to be a fair amount of Canadian examples out there. |
| |
Replies: 17 / Views: 1,922 |
Posted 09/20/2024 8:29 pm
