Best Way To Buff Out Scratches On A PCGS Slab?

To participate in the forum you must log in or register.

Author	Replies: 7 / Views: 352
LibertyEagle20 Pillar of the Community United States 1300 Posts	Posted 11/05/2026 4:17 pm Really don't want to spend money reholdering plus I like the ogh. What options do I have? Report this Post to the Staff

Brandmeister Pillar of the Community United States 7069 Posts	Posted 11/05/2026 4:23 pm Ordinarily, I would say that filling the scratches would result in a cleaner window, but who knows what vapors that would release towards your coins? Report this Post to the Staff
LibertyEagle20 Pillar of the Community United States 1300 Posts	Posted 11/05/2026 4:30 pm That's exactly my worry too, anything chemical may cause problems. This is a nice well struck 42-s so I def don't want that to happen. Report this Post to the Staff
jbuck Moderator United States 200382 Posts	Posted 11/05/2026 4:43 pm Yikes! I have read about people using headlight restoration kits, but having used them on actual headlights, I would be afraid of what might happen any of the chemicals seeped inside the slab. The seal is not 100% impervious. Maybe some rubbing compound and the buffing wheel on a rotary tool would be safer? Coin Collector Since 1978 Avatar Old Avatar 7070 Eisenhower Australia Canada World CCF Members on eBay CCF eBay Search Engine Report this Post to the Staff
MisterT Pillar of the Community United States 2034 Posts	Posted 11/05/2026 5:33 pm You might want to try wet sanding. start with 400 grit and progress to 2000 grit or better. Then a spray coat of Krylon clear. Other than that, reholdering is the only option. Report this Post to the Staff
mikev50 Pillar of the Community United States 2349 Posts	Posted 11/05/2026 6:13 pm have you tried this product Report this Post to the Staff
Greasy Fingers Pillar of the Community United States 7472 Posts	Posted 11/05/2026 10:15 pm Being that I have an autobody background, I'd go the route MisterT mentioned. Luckly most of your scratches are relatively in the same direction, so it can be done just be patience as you work towards the higher grits. Report this Post to the Staff
tdziemia Pillar of the Community United States 8092 Posts	Posted Today 10M ago Quote: You might want to try wet sanding. start with 400 grit and progress to 2000 grit or better. Then a spray coat of Krylon clear. Other than that, reholdering is the only option. I wonder if just going straight to a clear coat might work for shallow scratches. Sure there is the risk that solvents in the coating might permeate the acrylic, but using multiple very thin coats would minimize the risk. I would experiment with somethng like a couple of 2x2 Airtite type holders (are they acrylic?) scratch them up, then do the experiment trying buffing on one and just a coating on another. Report this Post to the Staff
	Replies: 7 / Views: 352

To participate in the forum you must log in or register.

All Forums Category: General Numismatic Forums Forum: Main Coin Forum

The First Dollar, your premier source for bullion and rare coins. See our bullion list on the site and the coin inventory on ebay.

Silver Gold Bull US is the United States leading bullion dealer. We deliver gold coins, gold bars, silver coins, silver bars and precious metals to your door. Order today!

View Last 100 New Topics

View Last 100 Active Topics

Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited.
Contact Us | Advertise Here | Privacy Policy / Terms of Use

Coin Community Forum

It took 0.26 seconds to rattle this change.