This 2006-P Lincoln Cent has me a little puzzled. There is, what appears to be, a decent die crack that runs from the tip of Lincoln's head, to the back of the head even with the middle of the ear. About half of it looks like a regular die crack. The bottom half gets wide and sort of looks like an attached lamination error. It looks you could peel off the bottom part. What do you guys think? Thanks for the help!
Looks like a crack that is close to becoming a chip.Another hour or two,(or perhaps even days) it wil fall away and there will be a die chip there. Concerning zinc lamination, I suspect rolled zinc can have lamination problems but the plating process covers them up and they are therefor not noticed in the final product.Just my thoughts, not an expert opinion.
Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited. Contact Us | Advertise Here | Privacy Policy / Terms of Use