]I realize this is not a photography question, but it is part of the problem! How can I adjust my primter, so it doesn't cut off 2" of the right side of the text? I tried to make a print-out of SuperDave's posts, (actually, all of them), and 2" is missing on the text. I can make a test page, and it prints correctly. Help! Dick
Chances are there's a setting for your printing process somewhere that says "scale to fit." I don't know which particular printer you're using, so I don't know where that setting is. For my HP Laserjet, it's under "Properties", then "Effects."
SuperDave, I just ran into this thread. Sorry about my late response, but thank you for the suggestions. My printer is a n HP 920c, so it puts me in the ballpark. Thanks again, Dick
Also, if you click the "Printer Friendly" link right above the quick reply box in the topic, that will at least eliminate the extra stuff on the left so it doesn't push what you really want off to the side. Then when you click the Print link on that page that came up, click the "Properties" button next to where it lists your printer.
In Properties, mine is under the "Advanced" tab, then a "Page Setting" button, then it has an option to choose "scale to fit". Mine's an HP, too, so hopefully between SD and I we can get you to the right spot
Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited. Contact Us | Advertise Here | Privacy Policy / Terms of Use