| Author |
Replies: 26 / Views: 2,511 |
Page 2 of 2
|
|
|
|
Moderator
 United States
56855 Posts |
Very nice find and a great price too. I would carefully remove that crud above IN. Nice photos also. John1 
|
|
Pillar of the Community
United States
1173 Posts |
|
|
Moderator
 United States
98403 Posts |
Quote: I would carefully remove that crud above IN maybe an acetone bath...
|
|
Moderator
 United States
56855 Posts |
I was thinking a wooden toothpick and then 100% pure acetone, but that's just me. John1 
|
|
Pillar of the Community
United States
589 Posts |
|
|
Bedrock of the Community
United States
62064 Posts |
A green (fresh) thorn would be better. Keep in mind that the gunk you see probably has sand/grit on the mixture. A toothpick could move it, but the sand in the grit can leave a scratch. So you need to dissolve it a bit to release the gunk from the coin. I use a soak in mineral oil to loosen the junk. It is more like the lubricants that are used on machines. But the thorn will give, where as the toothpick is stiff.   Experiment on common circulated coins to get down the technique first. On the coins on the image above, I covered 1/2 with tape, for the before and after images. Only use this on heavily circulated coin with the issues seen above. Never use this on a BU coin or even attempt it on a proof coin. The mineral oil will not remove stains, only dissolves the greasy gunk on the coin. Not to be used as a cleaner for coins, but to remove attached gum around the devices. Stains are permanent. Carbon spots are permanent. Split plating can't be fixed. So it would be a waste of time trying to do something that couldn't be done. Always try on a common normal coin from circulation first. Don't ruin a good coin. CoopHome: How can I remove gunk from around the devices of circulated coins. Is there any risk in removing this? Will this make the coin new again? No! Just a removal method for gunk attached to the devices.
|
|
Pillar of the Community
 United States
7174 Posts |
|
|
Valued Member
 United States
52 Posts |
Thanks for all who responded. I was considering sending the coin for grading, I could be wrong, but it doesn't appear cleaned, it appears to be in the stage where it is changing from RB to BN. Dont know exactly how to describe it.
I could be completely off with that assessment.
Im also nervous on acetone / mineral baths and restoring. I know grading companies can do their own restoration however it can also open up more problems.
|
|
Moderator
 United States
56855 Posts |
I do not think it is worth sending in,IMHO. John1 
|
|
Pillar of the Community
 United States
5800 Posts |
Nice pick. Congratulations.
That's a $100 AU coin and would be about $30 to put it in an ANACS slab.
Words of encouragement are one of the major food groups. We need to consume them regularly to thrive and grow.
|
|
Valued Member
 United States
52 Posts |
This ended up with a grade of MS 63 RB through ANACS. should have pictures in a few days
|
|
Valued Member
 United States
52 Posts |
Here it is, straight graded to MS63. very happy with this one 
|
|
Valued Member
United States
299 Posts |
|
|
Bedrock of the Community
United States
94367 Posts |
Good eye on this, congrats!
|
|
Pillar of the Community
 United States
8816 Posts |
Another nice snag, congrats!
-makecents-
|
|
Page 2 of 2
|
Replies: 26 / Views: 2,511 |
Page 2 of 2
|