| Author |
 Replies: 35 / Views: 8,927 |
|
|
|
Pillar of the Community
United States
1691 Posts |
looks much better....remember, acetone is highly flammable and should not be inhaled
best if you can work with it outdoors...good job!
|
|
Pillar of the Community
United States
1348 Posts |
the coin looks good. you did a good job. Shows what a little liquid and qtip can do. Thanks for sharing
|
|
Bedrock of the Community
United States
20753 Posts |
That coin does appear much better now. As long as you have the Acetone, nothing to loose with a few more attempts. With the Acetone you have always first test it for purity. This is simple. Using a really clean, clear glass dish or even a glass, pour some in it. Allow to evaporate completely. If pure there will be nothing left. If not, usually a faint whitish dust will be there which is the residue from tainted Acetone. And always remember to rinse with distilled water.
|
|
Valued Member
United States
455 Posts |
Your coin looks much better after the acetone treatment. I have some gunky coins that I'm going to try out after seeing the results you got with your Morgan.
|
|
Rest in Peace
United States
9104 Posts |
Remember, acetone is a solvent for petroleum based gunk. Some stuff like the tape glue, it will work wonders, other stuff it won't do a thing.
|
|
Pillar of the Community
United States
1348 Posts |
what about green stuff on coins?
|
|
Rest in Peace
United States
9104 Posts |
Depends on what it is. Verdigris is a hard green caused by chemical reaction of copper. Verdigone from Bad Thad would be your best bet for that.
There's a soft green caused by breakdown of leather. It can be scraped off with your fingernail or a toothpick, or dissolved in acetone.
Then there's a slimy green that comes from plasticizers. Acetone will generally remove it.
|
|
Pillar of the Community
United States
1348 Posts |
its a hard green stuff. I may have to get a hold of bad thad and see what he is offering. Thanks
|
|
Valued Member
United States
167 Posts |
An alternative to acetone that is a stronger organic dissolver and should not affect metal is toluene or xylene. These are related to benzenes and are toxic so use outdoors only. Don't use acid derivatives such as alcohols as these can react with the metals. Toluene is a really good wax dissolver.
Of course test with a lower value silver coin first. I don't think purity should be a concern stuff bought at home depot should be okay.
|
|
Pillar of the Community
United States
509 Posts |
How about the acetone the ladies use for removing fingernail polish? Same thing?
|
|
Bedrock of the Community
United States
20753 Posts |
Quote:
How about the acetone the ladies use for removing fingernail polish? Same thing?
NO, NO, NO. Read the lables on those. They contain so many different things you will be amazed that fingers don't fall off.   And many don't tell you how much of them is in their product either. |
|
Pillar of the Community
United States
509 Posts |
Gotcha. Thanks for that info. Now the question that comes to mind is will this treatment show up under the new PCGS Secure Plus processing system where they laser scan each coin, not only for identification purposes but also looking for any signs of alteration or treatments, i.e. chemicals, whizzing, AT etc...I haven't seen a list of ALL the things it scans for as far as foreign substances but I know it's quite extensive. For now PCGS is only using it for ultra-rare and rare coins but it will eventually work its way down to standard grading. Would I be inviting a future bodybag if I ever did decide to use acetone on a coin I wanted to submit?
|
|
Rest in Peace
United States
9104 Posts |
I don't see how acetone could be a problem.
|
|
Pillar of the Community
United States
4421 Posts |
Quote:
Would I be inviting a future bodybag if I ever did decide to use acetone on a coin I wanted to submit? Just be sure that the coin is dry. If put in a dlip too soon after treatment, the acetone won't escape. |
|
Valued Member
United States
89 Posts |
Wow, the acetone treatment rlly worked for you! I gotta try it...
|
| |
Replies: 35 / Views: 8,927 |
First Page
Posted 02/28/2011 10:35 am
