Looks like several of the devices near the rim area are widened from coin contact. Perhaps vending machine damage could have affected them. On Five Cents, you can see the devices closest to the rim are flattened a bit and making them wider. The devices further from the rim are normal in shape. On a DDR the devices are evenly showing the same hub doubling: http://www.varietyvista.com/03%20Bu...6PDDR001.htm http://www.varietyvista.com/03%20Bu...6PDDR002.htm Also note on the doubled dies, if the same event of contact on the devices happen on some coins, those areas are affected to be even large in size. Contact on a coin is not a good thing.
Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited. Contact Us | Advertise Here | Privacy Policy / Terms of Use