Just Machine Doubling. Note the dots between the devices. This is where you would expect to see elongated dots that look egg shaped. Also the MD is seen on the right side of the devices. Machine Doubling is flat shelf like. Just like your coin: Note the devices are not enlarged like the examples above. They are reduced because of die damage after the strike. So on these it is caused by the machine. dies has the doubling on the die.
Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited. Contact Us | Advertise Here | Privacy Policy / Terms of Use