Ok - so I have seen posts that are determined to be a "vise job". Is this what I have here or is it an error? The things that I noted were
- Both semicircles seem to match a penny - It appears that the lower smaller semicircle has indentations that potential match the column spacing from the memorial above? - There appears to be a number 8 and another number in the "C" of cent - The edge thickness is different in the areas affected - Stress cracking on obverse in area affected
So what do you think? vise job?
Ps - John1 - I have noticed your "nudging" for a 100 post contest. At first I was wondering what you were talking about, but have since figured it out. I will read up on what others have done and the rules and will see about putting something together.
Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited. Contact Us | Advertise Here | Privacy Policy / Terms of Use