Contour removal after the strike by a loose machine. Happens a lot more on the larger coins than on the smaller ones.
Contour shows the light to dark colors on a coins devices. When Machine Doubling happens on a contoured edge, the light to dark is abrupt. The flat area shows light, instead of darkness that should be seen on contour. This is seen on the outside/inside edges of devices machine doubled devices. Only a doubled die, will strike doubled hub devices. Machine doubling doesn't create a doubled die, but a doubled die can have Machine Doubling. So if the light to dark gradual appearance is not on the devices, it is probably Machine Doubling on the strike.
Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited. Contact Us | Advertise Here | Privacy Policy / Terms of Use