| Author |
 Replies: 16 / Views: 3,524 |
Page 2 of 2
|
|
|
|
Rest in Peace
United States
7075 Posts |
Sorry, I was wrong, the half-dime has stars on the obverse.
Is there any chance that it's silver?
|
|
New Member
 United States
19 Posts |
Thanks for the reply Buddy. The Draped Bust has an almost 29mm. diameter so it's much larger than a Half Dime or dime. It's almost the size of a half dollar such as a Barber or later half. Jim.. |
|
Bedrock of the Community
United States
14454 Posts |
I am not convinced thats a large cent. I have a 1803 Large Cent but have never seen one with a reeded edge. The size of the Large cent would be close to the Half Dollar size, I just can't see how a Large cent would ever have a reeded edge. This is my 1803 Large Cent   |
|
Rest in Peace
United States
10625 Posts |
The details certainly look like an 1803 large cent. Can you weigh it?
|
|
Pillar of the Community
United States
4421 Posts |
Original "Racketeer Nickels" of the 1883 No Cents variety were given reeded edges by a machinist of that era; this, prior to being gold-plated that they might pass as a $5 gold piece. This large cent coin may perhaps have been used as a trial run for such a project? Otherwise, in answer to why someone would do this to a coin ... because they could! Back in the 1800's, all manner of machine work was done to coins, and large cents were a prime target. Some were even turned into clock gears, pie-cutting tools and the like.
|
|
Rest in Peace
United States
7075 Posts |
ExoGuy - great information. If it was plated it is possible that the plating wore off, perhaps. And as for turning large cents into all sorts of things...guilty. I can remember using a LMC to fix a blown fuse. |
|
Moderator
 United States
16679 Posts |
I agree, done post Mint.
swcoin.ecrater.com
|
|
New Member
United States
19 Posts |
OK, here is the reverse of the coin. I tried to load two pictures of both sides but it seems I can only have one picture. Is there a way to post both sides. Thanks, Jim.
|
|
Moderator
United States
16679 Posts |
Yep, Photobucket.
IMG codes, copy..paste to CCF.
swcoin.ecrater.com
|
|
Bedrock of the Community
United States
14454 Posts |
Thanks for the Reverse picture, I have never seen anything like this myself but when I photographed mine I took it out of the album to see the size comparison and it is almost the same size as a half dollar as you said. I was thinking maybe the Reverse was eaten away and it was another denomination coin, but it definitely says One Cent on it as it should. It may have been someone doing this to try to pass it off as a Half when they were in circulation since the size is pretty close to the same. If it was done post mint someone did a good job on it, but I have seen one other coin that had reeding added that to my untrained eye on errors, couldn't tell and would have thought it was some type of error if I hadn't been told different.
The problem with the picture, is the name the same? if they both have the same name then they will overwrite each other when you try to upload them. That is if they are uploaded on the same date anyway
|
|
Bedrock of the Community
United States
17884 Posts |
It is an S-256 and almost certainly reeded post mint. Reeded edges were applied by a collar die and the cents were struck with an open collar. The half dollar at the time did not use a reeded edge and the eagle used a 33 mm collar, much too large for a large cent. So the mint had no collar dies that size.
|
|
New Member
United States
19 Posts |
OK, now I have both pictures of the coin loaded so you can see both sides. What's interesting about this coin, is how did it get reeded, it's a perfect job, and who had a collar of this size because this was done by machine. Also you can tell this coin was in circulation for decades with the reeding. There is a nasty rim ding at 7 o'clock and alot of wear to the reeding from heavy ciculation. Any opinions are greatly appreciated, Jim.
|
|
Pillar of the Community
United States
1358 Posts |
That reeding doesn't look worn down enough for a coin in that grade, IMO.
I'm thinking post-mint as well.
|
|
Pillar of the Community
United States
4421 Posts |
Any number of 19th century die sinkers who made tokens and medals had the ability to add reeded edges to a coin.
|
|
New Member
United States
19 Posts |
Hey Everyone, thanks for all the help. This is with out a doubt the best website I have ever been on in regards to the community, a place where you can have an honest staight forward conversation with smart, kind and thoughtful people. UNBELIEVABLE ! ! Thanks, Jim..
|
|
Page 2 of 2
|
Replies: 16 / Views: 3,524 |
Page 2 of 2
|
First Page
Posted 01/12/2012 6:42 pm
