| Author |
 Replies: 17 / Views: 2,542 |
Page 2 of 2
|
|
|
|
Bedrock of the Community
United States
75320 Posts |
I agree with mtuna3. Looks like solder damage.
Errers and Varietys.
|
|
Moderator
 United States
34450 Posts |
Well, it could be solder, but I'm doubtful that the solder gun (600 to 700 °F) would get hot enough to melt the underlying nickel. It could be from brazing, but I'm sticking with my original guess of welding.
"If you climb a good tree, you get a push."
-----Ghanaian proverb
"The danger we all now face is distinguishing between what is authentic and what is performed."
-----King Adz
|
|
Bedrock of the Community
United States
12437 Posts |
It looks like brazing brass/bronze.
|
|
Pillar of the Community
7234 Posts |
I'm with brazing splatter too - solder is silver colored and probably wouldn't even stick to a nickle alloy because it doesn't get hot enough.
|
|
Pillar of the Community
United States
1101 Posts |
|
|
Pillar of the Community
 United States
3058 Posts |
Too bad, 1892 is a semi key!
|
|
Pillar of the Community
7234 Posts |
When in doubt - try it out! I went out to my shop and put some braze and solder on a nickel. Brazing was goldish, and solder was silver but DID stick to the nickel alloy.  |
|
Moderator
United States
34450 Posts |
Nice work @mark1959! In looking at the rev on the OP's coin, it appears as though the coin itself is melted in one spot (between the V and the rim at three o'clock). That was main reasoning for thinking that the temp needed to be so high.
In the end, though I think that so far everyone has agreed that it was molten metal added to the coin at some point.
"If you climb a good tree, you get a push."
-----Ghanaian proverb
"The danger we all now face is distinguishing between what is authentic and what is performed."
-----King Adz
|
|
Pillar of the Community
7234 Posts |
Quote:
That was main reasoning for thinking that the temp needed to be so high. yeah - I had the cutting torch on my tanks (I wasn't going to take the time to put on a brazing tip) and I got the nickel cherry red - could have easily burned a hole right through it if I wanted to . Heres that cent I torched before to show another point - I just barely put the torches to it and in a few seconds it collapsed into itself.   |
|
Rest in Peace
United States
17900 Posts |
Super nice error you have there, Mark  |
|
Pillar of the Community
7234 Posts |
Quote:
Super nice error you have there, Mark |
|
Pillar of the Community
 United States
505 Posts |
@Spence, sure is a nice find in circulation!
@Mark, thanks for the trial run to compare and prove.
@everyone, Thank you guys for the response! So, next question...is there any worth left for this semi key nick? Or is it just one to throw in the oddity pile?
|
|
Bedrock of the Community
United States
94367 Posts |
For me it would be the oddity pile!  |
|
Pillar of the Community
United States
505 Posts |
|
|
Bedrock of the Community
United States
17884 Posts |
Quote:
Heres that cent I torched before to show another point - I just barely put the torches to it and in a few seconds it collapsed into itself. That's because the zincoln melts at just 800 degrees F, your nickel won't melt until some where between 1,984 and 2,651 degrees. |
|
Page 2 of 2
|
Replies: 17 / Views: 2,542 |
Page 2 of 2
|
First Page
Posted 08/24/2017 4:39 pm
