Is This Coin Genuine? 1800 MO Fm

Dorado The 1806 is the correct design and at this resolution shows none of the characteristics that told me the coin was a fake (numismatic forgery).

That said I would like to see clearer pictures including the edge of the coin.

Quite often it is the edge that allows a conclusive diagnosis.

Another thing to keep in mind, there are no silver copies of Potosi coins made for circulation in the late 1800s after die transfer techniques were developed. The counterfeits of Potosi coins tend to be early and crude. The Numismatic forgeries are less common but typical of the type.

swamperbob, that rectangle to the left of and slightly overlapped by the correct window was what I was calling the 'extra' window.

realeswatcher Interesting comment. The fact that he has done this before places it in a much different light. So he is incredibly arrogant and relies on the ignorance of the average buyer to distribute his fakes.

This is the type of seller that we used to suspend. That at least would force him to open a new account with a new bank account and address. Today as I understand it he would only have these 9 items cancelled and ebay would allow him to keep selling crap.

It really proves the value of forums where Bad Sellers can be identified and avoided. It also proves how critical it is to know the signs of forgery seen on these cheaply made fakes.

I wrote to the seller and "Barbara" replied very quickly claiming that they know nothing about coins. So I gave "her" two examples of proof in picture form. Then I suggested they get my book to see the same error on an example of the coin I have examined and tested.

I will see what happens as a result.

Squire Wilson You made a comment that needs just a bit of discussion to eliminate some apparent incorrect beliefs.

You say:


First I presume the comments refer to the 1800 Mexico City coin that I posted. This is critical because there is standard variation mint to mint.

Are you aware that each working die made in the colonial Spanish mints was individually made using a series of impressions made from elemental punches that were copied from a master punch made from a Matrix Block?

This Matrix Block was made in Spain and shipped to specific mints. The blocks were NOT IDENTICAL mint to mint. This makes it possible to identify 8Rs without visible mint marks.

So for example the three Fleur-de-Lis appeared on ONE punch and the spacing and orientation of the individual fleurs is different for each colonial mint. The Mexico City punches were made from a master die block which has the upper left fleur tilted to the right (final coin view). The 1800 Mo FM coin in fact uses the correct orientation and tilt for Mexico City. (The forgery was copied from a genuine coin.) Regarding the "poor" appearance of the fleur - that is rather typical and can be blamed on two things. First the punches used to make working dies were used many times and they did wear. The edges of the 3 fleur punch can lose sharpness due to away or chipping - but the internal spacing of the three fleurs is constant. If one fleur shifts location or orientation all three do as well. Small variations in appearance can also be attributed to die wear and chipping of the working die. Finally variations in appearance can and do occur because of wear and damage to the individual coin itself. When looking at these coins always try to eliminate wear and chipping evidence as you go long.

An extremely critical factor that you need to understand is which elements were found on EACH punch. I have studied thousands of examples of 8 reales just to identify these patterns. They do form a solid database which can be assembled from genuine examples of high grade coins.

Your second comment refers to the design below the fleurs and between the Lion and Castle. This is the representation of a pomegranate. Each of these features is a symbol found in the heraldic shield of Spain. The pomegranate is a feature that was punched into the die individually. So position inside the "window" can and does vary die to die. This is one feature which was virtually identical mint to mint (at least as far as I can ascertain at this time). Once again some variation in appearance can be attributed to punch, die or coin wear (or a combination of all three). I do not believe that there was an intentional variation in design. So for the 1800 I view any difference in appearance to damage to the punch element, die or coin.

The dots (stops) that divide the text were made with individual punches so spacing does vary and is a very useful way to distinguish between individual dies. The size of these stops vary so it is my belief that the stop punch was individually crafted in the mint and not created from the matrix block in all cases. Punch, die and coin wear again contribute to differences in appearance.

The final comment refers to denticles that form the border of the coin on both sides. Dentils are found on the matrix block iteself and they consist of a series of several lozenge shaped dentils in an arc. These short arc segments are punched in sequentially to create a circle. At pints where the arc seqments join/overlap there can be small errors in spacing that are EXTREMELY useful in identifying individual dies. That can be done for each of the 6 1800 coins to prove that they were all copied from one original. So how should you look at individual coins? There are a few "musts" that take place as a result.

1. The dentils were complete on the actual die and the diameter (outer edge to outer edge) of the die was larger than the size of the planchet. That means unless a strike is severely eccentric that the dentils should run OVER the edge all around. There is no way for a dentil to end before the edge unless the entire dentil image appears (in that case the dentil exactly opposite must be almost if not entirely missing.

2. The dentil arc is NOT a series of short straight lines but rather a more or less smooth circle of short arc segments. The die sinker could overlap the punch to make the circle close correctly. Spacing variations occur ONLY at the joins. Because dentils are on the edge of the die they are easily damaged so look for evidence of recutting on the die before assuming a coin is fake. Length also can vary slightly if the arc is set a fraction of a mm too close to center.

3. Some forgers making copy dies will extend the dentils to the edge of their fake dies by simply engraving straight lines to the edge of the die. This is incorrect. The dentils are actually losenge shaped with slightly curved sides.

4. I am still uncertain if the dentils are identical at all mints. They are so fragile that high grade examples for study are harder to get than for internal die features. The edge designs vary mint to mint by intent. When a banker stacked a pile of 8 reales he could theoretically distinguish the mints and remove coins from mints he either wanted or did not want. The edge was more than just a simple anti-counterfeiting devise.

So in summary the features on an 8R die are in almost all cases different and the difference was intentional on the part of Spanisg authorities.

Thanks a lot for the detailed explanation swamperbob

I am really interested to learn what the remaining 5 flaws are are

Squire

The 6 flaws were that there were 6 identical copies of the coin.

It is of course extremely difficult to find two or three well circulated 8Rs from the same die pair so 6 at one time was something special.

cableguy815 Yes it was!

I said;




I said reasons - not flaws. It pays to read the text as written not as you think it was written. It is the same way you have to read seller descriptions. Word for word.

I was having just a bit of fun since most sellers of forgeries only put them up one at a time.