| Author |
 Replies: 16 / Views: 2,319 |
Page 2 of 2
|
|
|
|
Valued Member
 United States
123 Posts |
No weight. The edge/rim of the coin looks normal though. Nothing struck into the edge/rim of the coin. That is why I think it is genuine. This is not my department of coin errors though.
|
|
Moderator
 United States
189340 Posts |
 to the Community! |
|
Bedrock of the Community
Canada
21633 Posts |
to the CCF Not genuine. A coin struck in collar cannot be that shape. Has been modified so it is PMD |
|
Moderator
United States
34428 Posts |
@123, first welcome to CCF. Second, I agree that someone (or something) has shaved down parts of the edge of a normal, round coin to give you this. It may have happened a long time ago and now the metal has all toned evenly, but it definitely didn't leave the mint looking like this. We something similar on medieval silver coins where consumers were trying to make a little extra money by shaving down their coins. I'm not saying that whoever did this to your coin was trying to harvest a little copper, but just to illustrate that this sort of coin damage has been around for a very long time.
"If you climb a good tree, you get a push."
-----Ghanaian proverb
"The danger we all now face is distinguishing between what is authentic and what is performed."
-----King Adz
|
|
Bedrock of the Community
United States
10635 Posts |
I agree, intentional post mint damage. There is nothing in the minting process that would produce such a coin.  to the CCF!  |
|
Moderator
United States
97433 Posts |
 the rim is not normal, it is gone in some places. just intentional damage. |
|
Pillar of the Community
Canada
6244 Posts |
I agree with the suppositions, are logic and pointed. I see something, like a very light off-center, then the clip effect but not everywhere the coin is deform. And better light photo is necessary. I do not advance any opinions, and agree is hard to believe a coin on this form can go out from the chamber, but with a collar lack ? 1955 was the year when they strike like crazy over 1 Bill coins in Denver, so many things could happened. A better photo is required and also from the sides if it is possible.
|
|
Pillar of the Community
United States
6116 Posts |
While I agree that the coin looks, for the most part, like intentional damage, I am including here an image of my elliptical clip. There are enough similarities that I wouldn't write this one off without a bit more research.  |
|
Pillar of the Community
Canada
6244 Posts |
Yes, from the point of view of physics of the coins, the minor off-center will result in an elliptical form due to the forces applied and the angles. Trop you has one side and give the elliptical at 180 degrees. Normal. In the case of a coins who miss one part of the collar what will happened? := Deform elliptical coin.
The rim side photos are very important in this case to elucidate the dilemmas.
|
|
Bedrock of the Community
United States
94367 Posts |
I am totally clueless on this and admit it freely.  |
|
Valued Member
United States
123 Posts |
|
|
Bedrock of the Community
United States
62064 Posts |
|
|
Valued Member
United States
109 Posts |
its definitely PMD, iv'e seen many of these, I just put in my junk pile, unless it is a semi or key date |
|
Valued Member
United States
123 Posts |
I just got a new gram scale, the weight of this penny is 2.72 grams. I know you guys said that this is definitely PMD, but I have looked around at some other coins like this and they were graded and they said that it was an elliptical planchet. One coin looked kind oflike mine, just a different date and on a bigger scale. I'm probably just being too hopeful and trying to prove myself wrong. Here's the link to the coin that looks a little similar to mine. https://www.ebay.com/itm/234381552643 |
|
Valued Member
United States
53 Posts |
Sorry but somebody abraided the edges after it left the mint. It is not an elliptical planchets, nor any type of error. The abraided/missing metal is why the weight is slightly low
Edited by Hobbs9
10/01/2022 8:08 pm
|
|
Page 2 of 2
|
Replies: 16 / Views: 2,319 |
Page 2 of 2
|
First Page
Posted 01/25/2022 5:05 pm
