| Author |
Replies: 16 / Views: 1,944 |
Page 2 of 2
|
|
|
|
Pillar of the Community
Australia
3831 Posts |
Unfortunately, once your fingerprint is on the coin, the only thing you can do is to conserve it, There are NO safe methods of removing such, and if it's an expensive coin, you should indeed send it over to NCS.
|
|
Pillar of the Community
United States
1203 Posts |
quote: Originally posted by Margaret I'll always have a smile when I think of how I aquired this coin but it sure makes me cringe to think about it too!!!
Margaret
Lesson No. 1: Never look a gift horse in the mouth! Great story and believe me it will never matter if the coin has prints on it or not. It will always be special for this reason.
|
|
Pillar of the Community
United States
1327 Posts |
if it has a finger prints there is nothing you can do to get riad or those. If it were me thought I would go and sell it to a dealer and get spot for it and pay 2-3 dollar more and buy a very nice new one. if you are worried about it having prints and scraces or just throw it will all your other silver. Most dealer sell ASE 2 to 3 dollar over spot. Just my opion or if it has meaning to you because the way you go tit then keep it the way it is.
|
|
Pillar Of The Community
3147 Posts |
Seeing how it is an Eagle I would drip some MS70 cleaner on it, rinse and gently pat dry with a very soft cloth. Don't get me wrong as I wouldn't do it with a collectable coin with any value but the Eagle's value is such that you won't be damaging more than a $13 coin at this time unless it is an 86 or 96? If it is either one of those dates----don't clean it just pray the fingerprints don't show up!
|
|
Valued Member
 United States
194 Posts |
It's most definately a 2006 and the finger prints are already very visible. I may try some of the MS70, but for the most part since I have a very nice 2006 Terry sent, this one won't break my heart.  It cracks me up everytime I think about it.  The man is a a very good businessman, but apparently doesn't collect coins. Makes me wonder where he got it from. Oh well, another day, another dollar! Next time he calls I'll be sure to mention GOLD! Margaret
|
|
Bedrock of the Community
United States
12437 Posts |
Acetone will remove finger grease from silver and gold without altering the metal. I believe acetone can be found at hardware stores in the solvent area (make sure it is 100% acetone). Some nail polish removers also contain acetone, but I wouldnt recommend this as most nail polish removers aren't pure acetone- they have other additives that will leave residue on a coin.
Edited by biokemist6 03/30/2006 10:58 am
|
|
Pillar of the Community
Belgium
2078 Posts |
quote: Originally posted by biokemist6
Acetone will remove finger grease from silver and gold without altering the metal. I believe acetone can be found at hardware stores in the solvent area (make sure it is 100% acetone). Some nail polish removers also contain acetone, but I wouldnt recommend this as most nail polish removers aren't pure acetone- they have other additives that will leave residue on a coin.
Nail polish remover may have switched to Methyl Ethyl Keton like it did over here in europe Acetone will work as long as the fingerprint is not yet etched into the metal
|
|
Rest in Peace
United States
2684 Posts |
quote: Originally posted by biokemist6
Acetone will remove finger grease from silver and gold without altering the metal. I believe acetone can be found at hardware stores in the solvent area (make sure it is 100% acetone). Some nail polish removers also contain acetone, but I wouldnt recommend this as most nail polish removers aren't pure acetone- they have other additives that will leave residue on a coin.
100% acetone is also sold at NAPA Auto Parts stores (and presumably other auto parts stores). I tried it on a bodybagged 1879CC (est G-06 at best) which had "environmental damage". Didn't do anything for the Morgan, but at least I have some gasket cleaner for automotive repairs.
|
|
Forum Kid
Kuwait
1523 Posts |
Some people...Just don;t know how to handle the coins!! Especially a coin like that!
|
|
Bedrock of the Community
United States
14454 Posts |
I got 100% acatone from CVS and have used it and sent coins in for grading and they were slabbed without a problem by NGC
|
|
Rest in Peace
United States
2684 Posts |
I get majestically vexed when I see an ebay coin auction with an image of someone holding a coin in his/her bare hands. While I understand some graders handle coins with bare hands ("to better obtain a sense of the coin"), I also understand they wash their hands frequently and handle the coins very delicately by the rims and that the grading rooms are temperature and humidity controlled to minimize sweating. Even so, I don't particularly like my coins being handled by bare hands by anyone, even if they know what they're doing; even the reeding will be affected by skin oils. In truth, I suspect they don't wear latex gloves for fear they will develop skin reactions and allergies. To my way of thinking, there is no excuse for collectors or dealers to handle coins without gloves of some sort unless they do it so often that development of a latex reaction is a real possibility. Even surgeons working with delicate nerves wear latex gloves although they may be hypoallegenic.
|
|
Pillar of the Community
Australia
1262 Posts |
I alway handle my coins..but I wear coton gloves and have a pair of coated tweezers so that no damage is done to the coin.
Very, very important for UNC (or better) coins.
|
|
Pillar of the Community
United States
867 Posts |
You can also get pure acetone at beauty supply stores, it's used to dissolve fake fingernails. Great story about the ASE! Just goes to show be careful what you ask for, you just might get it!   Rachel [:p]
|
|
Pillar of the Community
Belgium
2078 Posts |
|
|
Forum Kid
Kuwait
1523 Posts |
OMG!!! Oh, with those fingerprints I would say Fat slob......and he probably has no brain!
|
|
Page 2 of 2
|
Replies: 16 / Views: 1,944 |
Page 2 of 2
|