That year had some weird stuff going on. I've seen devices that were thick, that still weren't doubled dies. On this one I was looking at the tops of the LIBERTY on the lower image above. I saved several from that year and filled a tube with them. But everything looked normal in shape, just some were thinner/thicker than others. Probably different die states from polishing issues. But they were all proportionate in size. On hub doubling there is usually a spread in a direction altering the shape of the devices. But on these I couldn't find that to be the issue. On the coppercoins 1984P-1DO-007 it looks a bit like your devices. But not exactly the same markers. You will have to look it up as the link to the dies are not working.
Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited. Contact Us | Advertise Here | Privacy Policy / Terms of Use