What kind of minting tolerances are acceptable for Canadian gold and silver maple leafs? For instance, I have a 2011 silver maple leaf that keeps coming out at 38.10mm diameter with the calipers. However, every website I checks lists the diameter as being 38mm even. Also, when I measure thickness, my measurement always comes out lower than the reference thickness, but the coin's weight is correct.
Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited. Contact Us | Advertise Here | Privacy Policy / Terms of Use