upgrading my photo stuff hey anyone see anything odd about this reverse? let me know what ya all think of the image as well trying a whole new system of coin photography for myself
You need to redo your lighting setup. What you want is for the lighting to be close to even across the whole coin. That's generally means the light source should be as directly straight down as possible without putting a hot spot on the image.
Try tipping the bottom part of the coin upward to get the light to flow across the entire surface of the coin. You might try a ramp to get the light angled a little bit. This is a 2X2 with a piece of cardboard in the open side taped tight. Covered with dark material and it helps get the light into your glass better. This is how I use it.
Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited. Contact Us | Advertise Here | Privacy Policy / Terms of Use