While these may look interesting, notice they do reduce the coins devices which would make it machine damage/doubling. Note on the "R" in the last image; look at the overall shape of the upright. The straight line is there, but the MD is altering/reducing that device in width. even the outside on the right side of the "R" is reduced from the MD. Even thought it looks so clear, note that just the upper part of the devices are affected. If this were hub doubling, it would be enlarged and affect the entire device. So while it is interesting, it is still Machine Doubling. Sorry
Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited. Contact Us | Advertise Here | Privacy Policy / Terms of Use