Posted 10/29/2015 4:06 pm
no problem its no secret most people try once and give up anyway.
use a die punch to put a hole in the center of the coin. for the Half dollar I punch 13mm
then anneal
then put over a ring mandrel and with a four ounce nylon hammer start tapping away.. eventually it will flatten out into a ring shape.
use a die punch to put a hole in the center of the coin. for the Half dollar I punch 13mm
then anneal
then put over a ring mandrel and with a four ounce nylon hammer start tapping away.. eventually it will flatten out into a ring shape.
