Ok so I looked up this year and mintmark on copper coins, and it looks very similar to the one on there, but I couldn't find any of the die markers. But what I did find was the way the Y looks in liberty looks like it was very heavily polished die. So I am thinking that the die markers may have been polished away in a later die state than the DDO-002. Maybe that's why I can't find the markers. But if all else fails I did find something interesting on the reverse. A retained lamination! Anyways thanks for the help. Hoping this is a doubled die!! The lams are next to the memorial building, just where the pole meats the roof and below the M in UNUM if you could not spot it.
Different MM punch, no chip in NE inside and can't tell if placement is same. AND, did you read the description, all type 1 dies will show this thickness, and says for instructional purposes only! This apparently is MDD!
Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited. Contact Us | Advertise Here | Privacy Policy / Terms of Use