1983 P Lincoln Memorial Cent / LMC Horizontal Mis-Aligned Die Clash

To participate in the forum you must log in or register.

Author	Replies: 9 / Views: 961
GMS5 Pillar of the Community Canada 1533 Posts	Posted 11/05/2018 11:23 am Found this over the weekend. 7 Degree Die Rotation to the right. Report this Post to the Staff

John1 Moderator United States 56855 Posts	Posted 11/05/2018 12:04 pm Nice die clash. Not a doubled FG,that is a worn die issue. http://www.maddieclashes.com/ John1 Edited by John1 11/05/2018 12:05 pm Report this Post to the Staff
GMS5 Pillar of the Community Canada 1533 Posts	Posted 11/05/2018 12:39 pm Thanks John :) Report this Post to the Staff
Errers and Varietys Bedrock of the Community United States 75804 Posts	Posted 11/05/2018 1:06 pm Nice find! That's a good Die Clash. The line connecting to the lower part of the building is called a Die Crack. Errers and Varietys. Report this Post to the Staff
coop Bedrock of the Community United States 62064 Posts	Posted 11/05/2018 1:11 pm The images are very good. Just a little issue with glare. Report this Post to the Staff
SilverDollar2017 Pillar of the Community United States 8715 Posts	Posted 11/05/2018 2:17 pm Nice find Report this Post to the Staff
GMS5 Pillar of the Community Canada 1533 Posts	Posted 11/05/2018 4:55 pm Yes Coop, it's the pesky LED lights on the scope. very tough sometimes. Report this Post to the Staff
coop Bedrock of the Community United States 62064 Posts	Posted 11/06/2018 2:11 pm Try making a curtain with a wire coat hanger stretched out and put some plastic grocery bags taped over the frame, then it will help to reduce glare when you place it between the light source and the coin. If you need something stronger try white paper. That will help remove glare and unwanted 2nd light sources to remove that glare also. Report this Post to the Staff
Conder101 Bedrock of the Community United States 17884 Posts	Posted 11/06/2018 4:00 pm I believe he has one of those USB microscopes that has the LED's built into it around the lens. Difficult to put a diffuser between those and the coin. Maybe tape a piece of tissue over the end and then cut a hole for the lens to see through. Or punch a hole with a hole punch through it and then tape it over the end. Report this Post to the Staff
GMS5 Pillar of the Community Canada 1533 Posts	Posted 11/07/2018 10:00 am Conder101 is correct, lights are in the scope, but good advice from both. I'l mess around this weekend. Thanks. Report this Post to the Staff
	Replies: 9 / Views: 961

To participate in the forum you must log in or register.

All Forums Category: US Coins and Currency Forums Forum: US Modern Variety and Error Coins

Silver Gold Bull US is the United States leading bullion dealer. We deliver gold coins, gold bars, silver coins, silver bars and precious metals to your door. Order today!

The First Dollar, your premier source for bullion and rare coins. See our bullion list on the site and the coin inventory on ebay.

View Last 100 New Topics

View Last 100 Active Topics

Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited.
Contact Us | Advertise Here | Privacy Policy / Terms of Use

Coin Community Forum

It took 0.27 seconds to rattle this change.

1983 P LMC Horizontal Mis-Aligned Die Clash