Take a look at this thing. Take a second look, be on the lookout for notches and extra thickness everywhere. Not the DDR 001 nor 002, completely different. I believe I nabbed one. Opinions please.
Start at lower right of C (notch) in AMERICA and work counter clockwise on all outer devices.Even with these bad photos the notches seem obvious. The green sheen is light reflection but in this instance it follows/reveals the splitting of devices. Not all doubled dies are rounded for example the 64 FS-802 is flat as a pancake on every device...the 68 D 801 also mimics Strike Doubling on several of its PUPS. The litmus test is the split tails I see with my loop, impossible to show with my inferior scope. I have counted 5 split tails on devices but coin is canted in order to view. What do you think this one will be attributed as? FS-801 or 802?
Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited. Contact Us | Advertise Here | Privacy Policy / Terms of Use