| Author |
 Replies: 23 / Views: 3,185 |
|
|
|
Pillar of the Community
United States
4417 Posts |
@MERCLOVER .... I can appreciate where you're coming from. Perhaps, a future owner will slab the 1956. From my perspective, the lower grade and damage don't make it worthwhile. I'm assured it's genuine, as is the expert/author/grader who evaluated it. I like the custom-made case.
Getting back to the OP's coin, I would scratch the edge or, better yet, find a dealer, coin or jewelry, who possesses one of those "ray guns" to determine the metal content. Crickets ....
|
|
Bedrock of the Community
United States
17884 Posts |
Quote:
Why doesn't our OP do an edge scraping on the 1956-D and settle the matter? An edge scraping won't tell you anything because the coin is inside a bezel. We see these plated cents in a bezel a lot. Notice at 6:00 on the reverse you can see where the edge of the bezel is bent back. That is where the loop was that has been torn off. It is the same type of bezel as the one pictured by Jasper only his still has the loop in place. But you can still see the same bending back of the edge of the bezel. |
|
Pillar of the Community
United States
4417 Posts |
@Conder101 .... Can a bezel not be removed? Also, the "gun" can detect silver, regardless. IMHO, this all comes down to whether the OP really wants to get the facts on his piece. Granted, the odds of it being an off-metal Lincoln Cent are extremely small, but I've seen a great many surprises in this hobby over many years. My finding a silver Conder slave token at a Florida flea market amazed me. BTW, this Conder token will get slabbed, as it's worth the added expense. I'll eventually start a thread on this piece. Another, presently unslabbed silver piece that came my way is an 1862 Monitor/McClellan token. Finds like this never cease to amaze me, and that's why I'd not be too quick to dismiss this OP's item. |
|
Pillar of the Community
United States
751 Posts |
ExoGuy;
What are the chances that your One Cent Coin, could also be a struck through ? The ridges around the indent do not appear to be raised.
Dan
|
|
Pillar of the Community
United States
4417 Posts |
@Dan .... I expect that the slightly larger cent dies flattened the dime planchet, spreading it out. A number of knowledgeable dealers & collectors, plus a TPG'er have seen my 1956. All have agreed it's simply a cent struck on a silver dime planchet. Please, note that I don't want to hijack this thread! I only posted my 1956 to show that there's a possibility of 1956-dated Lincoln cents being struck in an off-metal. Personally, I'd not too quickly too quickly dismiss that possibility with the OP's coin. |
|
Pillar of the Community
United States
2189 Posts |
On the bottom of the reverse of the OP's coin where the eyelet once was the silver plating has worn off exposing the copper. You have nothing more than a 1956D COPPER LWC encased in a copper bezel. there's nothing more to it. sorry but it's only worth a few dollars as a novelty  Edited by jasper62
12/04/2019 5:43 pm
|
|
Bedrock of the Community
Australia
21788 Posts |
I have about a dozen plated coins from around the World. Most of them were obtained from dealers' junk boxes mostly LCS or at coin shows, over a period of about 40 years or so.
I don't value them at any more than for unplated coins, but I have kept them all. They are a good way to demonstrate how
new collectors can be fooled into thinking they may have an exceedingly rare off metal strike error.
|
|
Bedrock of the Community
United States
17884 Posts |
Quote:
Please, note that I don't want to hijack this thread! I only posted my 1956 to show that there's a possibility of 1956-dated Lincoln cents being struck in an off-metal. Personally, I'd not too quickly too quickly dismiss that possibility with the OP's coin. Yes there is always the possibility that when someone posts a "silver penny" that it could be a off metal struck on a dime planchet, but if it is then it will also be undersized and not show the rim all the way around. Even withthe bezel it is clear the cent is full size. An yes you could remove the cent from the bezel, but since it is crimps all the way around, and typically this type of bezel is made of steel, chances are very good you will do a fair amount of damage to the coin in removing it. (Of couse the damage done will also most likely break through the plating proving it is plated as well.) |
| |
Replies: 23 / Views: 3,185 |
First Page
Posted 12/04/2019 10:07 am
