I see die wear issue, Machine Doubling issues. But no RPMs. You might check out the RPMs for that year of nickels to see what to look for on these: http://varietyvista.com/05%20JN%20R...%201964D.htm The first thing you will know about them, is this; All the mintmarks are enlarged and not reduced in size. When you look at the edges of devices and you see that area flat, shelf like, then you are looking at Machine Doubling. Note on the RPMs, you can see the contour on all sides of the devices. MD removes the contour. Leaves it, flat, shelf like. So knowing what you are looking for is the best way to search coins.
Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited. Contact Us | Advertise Here | Privacy Policy / Terms of Use