Looking at the distance between the two, note that the digits are not the same size. So the larger/smaller digits tells me that size does matter. If the devices were the same size, then the distance would be correct. An exact match of the shape of the RPM also counts. Because they are the same shape, they are from the same die. Thus when I size the devices, I always make the width the same distance, so the devices will be the same size. Then I check also the vertical, because when images are taken at a strong angle, the height of the devices can be affected. When the digits are the same size horizontally and vertically with the digits, then I deal with mintmark location, last.
Edited by coop
05/02/2021 6:15 pm