Machine Doubling on the reverse devices. The DDR is on the centers of the designs on obverse and reverses. Not on the outside edges of the devices near on the rims. Obverse: http://doubleddie.com/186385.html Bottom of earlobe. Nothing else listed on the reverses. Just the one earlobe example. These dies are the single squeeze dies and the doubled dies are found more towards the centers of the devices. Looking any where else is pretty much a waste of time on these. So take a look at the locations to see what you should be looking for, then you will find the doubled dies. Target areas for Nickel and Dime reverses, post 2000 coins. http://goccf.com/t/361724 Target areas? What does that mean? (read this thread and you will know) http://goccf.com/t/394126
Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited. Contact Us | Advertise Here | Privacy Policy / Terms of Use