Tried to move light a little. Probably no big deal. Is there an extra vertical bar inside the MM. At certain angled light looks like something at arrows. Like I said probably nothing.
Need to see the other devices below this area, to see if this is Machine Doubling post strike. I don't think this is a RPM. Why? If it were, then the inside of the top loop on the inside would also be affected. Also the overall size of the mintmark is reduced, not enlarged showing a double punch on the mintmark. http://www.varietyvista.com/09b%20W...201963-D.htm I see contact marks on the tops of the mintmark and MD on the bottom edge of the mintmark. Thus seeing the bottoms of the devices on that area will show us more. (Not more images of the mintmark, but the devices near the rim areas)
Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited. Contact Us | Advertise Here | Privacy Policy / Terms of Use