2" By 2" Cardboard Holders And Staples

To participate in the forum you must log in or register.

Author	Replies: 8 / Views: 1,757
mcshilling Pillar of the Community Canada 9158 Posts	Posted 05/06/2010 2:15 pm For those that use these are you having trouble with the staples not going in right? For every 2 by 2 I use I get 1 if not 2 staples that do not go in right. I have tried new staplers and different staples. Is there a special stapler and staples? Report this Post to the Staff

RPT Pillar of the Community United States 921 Posts	Posted 05/06/2010 2:20 pm I use a flat clinch stapler I bought at Valley Coin. It works great. http://www.valleycoin.com/product_i...cts_id=11681 Report this Post to the Staff
Tim Stroud Pillar of the Community United States 2661 Posts	Posted 05/06/2010 5:06 pm I use standard staples and a Staples brand one touch stapler I bought at, where else, Staples. It is a flat clinch stapler and works the best of any stapler I have ever had. It was cheap too! on sale for $7.99. Report this Post to the Staff
snowman Pillar of the Community United States 1840 Posts	Posted 05/06/2010 8:05 pm I've had this problem in the past. Get a stapler that is rated for 20 or so pages. Report this Post to the Staff
John1 Moderator United States 56855 Posts	Posted 05/07/2010 07:40 am I have trouble with the staples going through and bending only when there are a few staples left in the stapler. When I put a new strip of staples in the stapler it will work just fine on the same 2x2 I had trouble with. John1 Report this Post to the Staff
Jim1953 Pillar of the Community United States 2600 Posts	Posted 05/07/2010 10:09 am Like Tim, I have a Staples "one touch" stapler and it works great. Being cheap, I use a pair of needle nose pliers to flatten them and it works fine. Jim Report this Post to the Staff
mcshilling Pillar of the Community Canada 9158 Posts	Posted 05/07/2010 11:10 am Thanks for the help, I think I will look into another stapler, a flat clinch one. Report this Post to the Staff
John1 Moderator United States 56855 Posts	Posted 05/07/2010 11:14 am I also use pliers, it makes a lot more room to store the 2x2's. John1 Report this Post to the Staff
RPT Pillar of the Community United States 921 Posts	Posted 05/07/2010 1:42 pm You don't need a pliers with a flat clinch stapler. Report this Post to the Staff
	Replies: 8 / Views: 1,757

To participate in the forum you must log in or register.

All Forums Category: General Numismatic Forums Forum: Supplies, Books, Reference, Software, etc

The First Dollar, your premier source for bullion and rare coins. See our bullion list on the site and the coin inventory on ebay.

Silver Gold Bull US is the United States leading bullion dealer. We deliver gold coins, gold bars, silver coins, silver bars and precious metals to your door. Order today!

View Last 100 New Topics

View Last 100 Active Topics

Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited.
Contact Us | Advertise Here | Privacy Policy / Terms of Use

Coin Community Forum

It took 0.22 seconds to rattle this change.