| Author |
Replies: 31 / Views: 4,028 |
|
|
|
Pillar of the Community
 United States
773 Posts |
Yes,count me in too :) sn31
|
|
Valued Member
Australia
335 Posts |
quote: Originally posted by sn31
Here's a question for you Pattiewhack..The first year for the "nickel" Canadian Dollar was 1968 right?Is this true for the dime,nickel,and quarter,etc...I understand that the 1968 dime is nickel also..Thanks,sn31.
Ah, this Aussie can answer that one. Last year of a (sterling) silver 5 cents was 1921. Nickel was used from 1922 with the exception of 1942-44 when copper-zinc was used and 1944-45 and 1951-54 when nickel and chromium plated steel was used. Cupro-nickel was used from 1979 until 2001 and the cupro-nickel plated steel was used in 1999 (trial), 2000 to date and coins carry a P to show they are plated steel. The 10 cents was sterling silver (92.5% silver, 7.5% copper) until 1936, then 80% silver and 20% copper through to and including 1967, then 50% silver and 50% copper in 1967 & 68, the nickel in 1968 to 2000 and the copper nickel plated steel from 1999 and 2000 trials to present and they carry the P for plated. The 25 cents was sterling silver to 1919, then 80% silver to and including 1967, then 50% silver in 1967 and 1968 then nickel from 1968 to 2001 with the cupper nickel plated steel coming in 1999, 2000 (issued for testing trials) to present with P for plated steel. The 50 cents was similar to the 25 cents except it went from 80% silver in 1967 to nickel in 1968, then same through to the present as for the 25 cents above. So some years share two different metal compositions. Cheers Wayne
|
|
Pillar of the Community
Canada
1472 Posts |
Hey Wayne, good info. This year will have two different metal composition nickels. We have had the plated up till about 2 weeks ago when some coins started showing up with no "P". These are not magnetic so one assumes they are cupro-nickel. There are also a few wrong metal errors or patterns from various years. I have seen 25 cent pieces from 1967 in nickel and 1969 in silver. These would be nice to find, they usually bring thousands of dollars at auction.
|
|
Pillar of the Community
Canada
1152 Posts |
the new toonie in August? would you be wanting one from circulation? because it always seems to take a while before newly minted coins come my way, It might not be until around even october until I start seeing some. When I do I will let you know and send some along.
|
|
Valued Member
Australia
335 Posts |
quote: Originally posted by Zonad
Hey Wayne, good info. This year will have two different metal composition nickels. We have had the plated up till about 2 weeks ago when some coins started showing up with no "P". These are not magnetic so one assumes they are cupro-nickel. There are also a few wrong metal errors or patterns from various years. I have seen 25 cent pieces from 1967 in nickel and 1969 in silver. These would be nice to find, they usually bring thousands of dollars at auction.
Thanks for the additional info there Zonad. Just my luck that a no P variety comes out after I get back to Australia (was in Toronto for a week in mid June). I have a 2006 P 25c I got in change. I also have a 2005 and 2006 no P 1 cent. Fancy swapping a couple of the ones I don't have for the Australian commemorative B mint mark dollars. I can send you the portable pressed and mint pressed versions for 2005 and/or 2006?
|
|
Pillar of the Community
 United States
773 Posts |
I think it was Metalman who told me the 1968 dime was struck from pure nickel,and some of them were struck from the Philadelphia mint,and it has no mintmark.Correct me Rick if I'm wrong.I think our discussion about this is in the "Hello,anybody there" topic at the bottom page of our topics.sn31. Ps.Thanks Wayne for the great info :)
Edited by sn31 07/30/2006 1:06 pm
|
|
Valued Member
Canada
195 Posts |
68 dime - some are nickel,some are silver.the Philadelphia mint coins ,minted in nickel have flat bottoms on the edge grooves.The ones minted in Ottawa have V-shaped bottoms on the edge grooves.
Bill
|
|
Pillar of the Community
 United States
773 Posts |
Thanks Bill,I'll have to check mine,not sure which one mine is. :) sn31
|
|
Pillar of the Community
 United States
773 Posts |
Bill,the 2000 dollar,is it a gold dollar?I'm not too familiar with the metal contents of Canadian coins,so I hope this isn't a silly question.I just like to know what I've got :)Thanks for your help :) :) :) sn31.
|
|
Rest in Peace
United States
3730 Posts |
For a while, back in the 1960's, Canadian coins were my favorites.
Now, all these years later, I'm becoming interested again, and would like to finish some of the collections I started way back then.
Thanks to a trade with Terry (ndgoflo) from Indiana, I have a bunch of Canadian coins to add to my albums.
So, will be checking the Canadian forum much more often.
Edited by Gary Burke 07/31/2006 7:39 pm
|
|
Pillar of the Community
 United States
773 Posts |
Gary,What type of Canadian coins do you collect?I'm into the large and small cents,but I pretty much keep what I can get my hands on :) Sandra.
|
|
New Member
Canada
2 Posts |
Hi, newbie here. I've been lurking for some time. I am from Canada and have collected coins for several years...but never very seriously. I started when I was in my late teen years just collecting coins from all over the world. Recently I have gotten into it more seriously. I inherited a lot of coins from my mother in law....now need to go throug them more seriously. All hers were Canadian. I find it all so fascinating! Thank youfor this great forum!
|
|
Valued Member
Canada
195 Posts |
Bill,the 2000 dollar,is it a gold dollar?I'm not too familiar with the metal contents of Canadian coins,so I hope this isn't a silly question.I just like to know what I've got :)Thanks for your help :) :) :) sn31.
The loon dollar is .915 nickel and .085 bronze. Bill
|
|
Forum Mom
 United States
5877 Posts |
Welcome to our CC family, Schmoopi!  I hope you continue to post instead of lurk. Your contributions will be welcome. 
|
|
Pillar of the Community
 United States
773 Posts |
Hi Schmoopi...Welcome to the forum!!If you need any help,there are alot great people who can assist you.Enjoy!! :) sn31.
|
| |
Replies: 31 / Views: 4,028 |