That looks like a rough edge from the die, like a long die chip. When looking at things like this consider how it would appear on the die. The fields on the coin are the surface of the die and the raised areas on a coin are incused on the die so this would be an exposed edge of the device. Chips would happen here from wear.
Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited. Contact Us | Advertise Here | Privacy Policy / Terms of Use