I have for your inspection one of my favorite coins, a 1983 P Lincoln Cent with 4 Die Cracks to the rim. Two are easy to see and the other two are lighter in contrast. This year of Lincoln cents show many assorted Die Cracks and my theory as to why is this was the first year of die strikes with only zinc planchet, and they had the Die pressure set high to assure a good strike. Copper being softer was easier to strike. Anyway the Die Cracks are at the corners of the Memorial on the reverse. The two on the left side are one from the second column to United over the T and the lighter Die Crack at the bottom of the left foundation. The other two are on the right side, the light Die Crack (tough to see) from the roof to America between the R & I. The last one is right of the foundation and runs to the steps! Let me know your thoughts after you review the pics. Nothing of note about the obverse. Regards.
The corners of the monument are high stress points for the die, these are very common even on copper cent coins. Yours are very nice examples and actually extend further into the interior of the coin than I have seen.
In the three and a half years since I have been looking at Lincoln cents it seems to me the 1983's are the ones I find with multibles of Die Cracks! I have one with 5 Die Cracks and two Die Chips. Regards to all!
Disclaimer: While a tremendous amount of effort goes into ensuring the accuracy of the information contained in this site, Coin Community assumes no liability for errors. Copyright 2005 - 2026 Coin Community Family- all rights reserved worldwide. Use of any images or content on this website without prior written permission of Coin Community or the original lender is strictly prohibited. Contact Us | Advertise Here | Privacy Policy / Terms of Use