| Author |
Replies: 19 / Views: 5,466 |
|
Valued Member
United States
136 Posts |
I stumbeled upon this auction on ebay. What do you say is this piece genuine or not ?  
|
|
|
|
Valued Member
United States
266 Posts |
fake, a lot of casting bubbles.
|
|
Valued Member
 United States
136 Posts |
Ah I thought so... those cant be environmental right ?
I guess the coin has other issues too eh....
-_-
|
|
Valued Member
 United States
136 Posts |
Can anyone else point out some other giveaways for this one.
I dont have much experience with cast counterfeits and would like to broaden my horizon.
:)
|
|
Valued Member
 United States
136 Posts |
|
|
Valued Member
United States
462 Posts |
|
|
Valued Member
 United States
136 Posts |
|
|
Valued Member
United States
266 Posts |
the 3 things that I am seeing here is, first, the multiple balls of metal like the ones around the "1 1/4" under the wildman. those are caused by voids in the mold used. Second is the voids in the coin itself, most notably under the "dux" on the reverse and around the middle helmet also on the reverse. These are caused by air bubbles in the molten metal poured into the mold. Lastly there is a general lack of fine detail in things like the wildmans hair, often this is described as "mushy details". Also just looking at the overall condition the coin will be graded due to the apparent wear no higher than XF, probably VF. But overall the fields are way too clean for a coin that would have seen that amount of circulation, in my opinion
|
|
Valued Member
 United States
136 Posts |
True True.
Also there is something that looks like a double die on the wildmans leg.
I guess that would be due to the metal flowing into the mold which has a empty area around there ?
Also the lettering looks just off the metal by H of Honesta looks like its melted and in general that area around there has this "molten" feature.
mmmh
|
|
Pillar of the Community
United Kingdom
2135 Posts |
|
|
Valued Member
 United States
136 Posts |
It does have similarities in appearance to the 1 1/4th thaler.
For Pcgs to grade it as genuine they must have their reasons. If it would be cast counterfeit then under the right magnification no matter how good it is the pros would always be able to identify it as such right ?
|
|
Valued Member
 United States
136 Posts |
Also one thing that I am wondering about is.
The coin appears to have been double struck.
What if the die that was used for striking already was very used and had little detail... this might explain the muddy details and they had to strike it twice because of that ?
Also those casting bubbles might it have been a flaw already present in the planchet ?
Just some thoughts....
|
|
Valued Member
United States
462 Posts |
Thanks I didn't realize it was a 1/ 1/4 thaler. BTW how much your coin weigh and where did you get it from ? I have a 2/3 thaler or 24 Mariengroschen. Its 13.01 g and doesn't sound like silver. I got it from the local coin shop for cheap, looks genuine except for the silver ring test.  
|
|
Valued Member
 United States
136 Posts |
The coin is 50mm and 36g I dont have any more specifics because I did not buy it yet.
I just wanted to know what you guys think to spare me the trouble of having my $ tied up.
What Rdwarrior said is to be considered however the planchets used to strike these coins are cast anyway so whatever ill give it a shot and get it certified.
I looked up your piece but I couldnt find any 24 mariengroschen with the same design.
I found 2 types in krause but both look different....
The ring test for me has proven to be very reliable in many cases.
Even low content silver coins always have that specific sound.
|
|
Pillar of the Community
United Kingdom
2135 Posts |
|
|
Valued Member
 United States
136 Posts |
I went on the german google and went on with my research there. This coin is extremely rare and its so hard to find references for it But I stumbled upon a genuine piece here it is  Just looking at it makes me think that there is no way that the piece on ebay is real. Also the exact specifications should be 53mm and 35.9 g Looking a bit further I found out that in 1978 someone made a replica with 51mm and 36.25g but I couldnt access the pictures for this. No way the 1 1/4 taler is genuine the metal looks off too more like tin or something like that. Yours looks off too plonker I found 2 specimen take a look  
Edited by GEKO 09/01/2013 03:53 am
|
| |
Replies: 19 / Views: 5,466 |